Coilover nitrogen pressure

[Brad597]

Was wondering what's the lowest and highest nitrogen pressure you can put in a 14 inch emulsion coilover?

 

[greenlion]

Most of them are around 200 psi. 150-250 is prob an ok range. Reservoir psi is not really a tuning tool for a coilover, just there to make the shock work right.

 

[wizzo]

Was wondering what's the lowest and highest nitrogen pressure you can put in a 14 inch emulsion coilover?

what brand shock? have you contacted the manufacturer?

Most of them are around 200 psi. 150-250 is prob an ok range. Reservoir psi is not really a tuning tool for a coilover, just there to make the shock work right.

reservoir psi is very much so a tuning tool for a coil over.

 

[TBItoy]

Re: Re: Coilover nitrogen pressure

On an emulsion shock, the nitro and oil are going to mix any way.

I'd start at 100psi, just enough to put some pressure on the oil and keep it from foaming up.

According to your shock shaft size, the amount of nitrogen in your shock will affect the spring rate a bit. (air shock effect)