DHR Darren
Well-Known Member
Anyone remember what parts are needed to make a 2wd TH400 trans into a 4wd? I wanted to run a divorced TC but that isn't looking like a viable option now as I can't find a GM divorce mount TC.
GM never used a divorced NP205. Dodge and IH did and one of those would work. Some of the 2wd th400s you can just unbolt the rear slip spline housing and trim the 32 spline shaft if it is too long. There are several lengths of slip splines or bolt on 2wd yokes.
GM never used a divorced NP205. Dodge and IH did and one of those would work. Some of the 2wd th400s you can just unbolt the rear slip spline housing and trim the 32 spline shaft if it is too long. There are several lengths of slip splines or bolt on 2wd yokes.
http://www.pirate4x4.com/forum/general-4x4-discussion/774487-th400-output-shaft-length-question.html
I might have 205 in the shed with a th400 adapter on it.