Sold/Expired Delete

[Stuntman Autoworks]

Delete

 

[Stuntman Autoworks]

Re: Built yota axles FS complete or partout. Longfields, gears, etc...

Bump I can seperate gears from the thirds also if somebody is wanting to go that way.

 

[Stuntman Autoworks]

Re: Built yota axles FS complete or partout. Longfields, gears, etc...

bump

 

[dwa2469]

Re: Built yota axles partout, drive flanges, gears, etc...

Are the drive flanges 30 spline?

 

[Gittinit]

Re: Built yota axles partout, drive flanges, gears, etc...

Are the drive flanges 30 spline?

If they were on a Toyota solid axle.... Yes...


Im interested in the highsteer arms. What brand? Cast or billet?

 

[dwa2469]

Re: Built yota axles partout, drive flanges, gears, etc...

If they were on a Toyota solid axle... yes

So Long doesn't make a 27 spline axle for a Toyota solid axle???

 

[smbroady82]

Re: Built yota axles partout, drive flanges, gears, etc...

So Long doesn't make a 27 spline axle for a Toyota solid axle???

they do but the "27 spline" refers to where the inner meets the birf......
at the hub and the diff they are all 30 spline..

 

[Stuntman Autoworks]

Re: Built yota axles partout, drive flanges, gears, etc...

Are the drive flanges 30 spline?

Yes they are, like stated above the diffs and hubs are 30 spline the only thing that is either 27 or 30 is the birff splines.

 

[Stuntman Autoworks]

Re: Built yota axles partout, drive flanges, gears, etc...

If they were on a Toyota solid axle.... Yes...


Im interested in the highsteer arms. What brand? Cast or billet?

I'm not sure what brand they are but they are billet one piece arms.

 

[Gittinit]

Re: Built yota axles partout, drive flanges, gears, etc...

I'm not sure what brand they are but they are billet one piece arms.

Thanks. Was hoping they were trailhead arms. Considering their reunion eliminator and it won't work with my old style marlin crawler billet/machined high steer arms. Glws

 

[Stuntman Autoworks]

Re: Built yota axles partout, drive flanges, gears, etc...

Thanks. Was hoping they were trailhead arms. Considering their reunion eliminator and it won't work with my old style marlin crawler billet/machined high steer arms. Glws

Mine aren't a trunion elimination arm if that's what your thinking. They look like the billet marlin crawlers but they don't have the angle machined into them and they are a 1 piece design.

 

[Stuntman Autoworks]

Re: Built yota axles partout, drive flanges, gears, etc...

Bump

 

[Stuntman Autoworks]

Re: Built yota axles partout, drive flanges, gears, etc...

bump with updated list