-
Help Support Hardline Crawlers :
Driveline disco
- Thread starter Brian H
- Start date
spidertoy
Mod dude....
crash bought his, he didnt make it, I am thinking about taking the replacement parts for his, and fabbing something that attaches to my pede tranny
crash2
-Oh no I picked a side-
Search RCC--there have been a few write ups on them. There is even a new dig unit for the axial trans coming out next week--supposed to be pretty slick...
But ya I am running an R2 tranny
But ya I am running an R2 tranny
Links to where you bought it.Tell me where i need to go to buy one of these things. I think it will work out pretty good on one of these. How does it lock up the rear when doing a front burn?
crash2
-Oh no I picked a side-
here is the tranny
http://rc4wdstore.com/product_info.php?cPath=64&products_id=663
the shaft slides back and locks it to the tranny hence--locking the rear
http://rc4wdstore.com/product_info.php?cPath=64&products_id=663
the shaft slides back and locks it to the tranny hence--locking the rear
How strong is it and how do I hook up the servo to my radio?
crash2
-Oh no I picked a side-
strong and you need a 3 channel radio for starters
Grommit327
Well-Known Member
Hey Brian since you already have the Axial tranny I would look strongly at the VF dig unit. It attaches right to the tranny and is a little bit easier to get a servo to work properly with it. And it's also a little bit cheaper. But if you didn't preorder then I think they are 3-4 weeks out still.
http://www.visionaryfabrication.com/sales/vfaxialax10digsystem.htm
http://www.rccrawler.com/forum/showthread.php?t=106075
crash2
-Oh no I picked a side-
If not longer. and one NICE thing about using the axial tranny--its narrower........ I might swap over to that tranny once the supply of dig units are adaquet...
crash2
-Oh no I picked a side-
I don't know--not familure with that radio...
hlb3
Zombie Hunter
From the pics, it looks like it is a 3 channel so you are good.
I would go with the VF unit, it is a much nicer design, if they would have anounced it like 2 weeks sooner, I would have never bought my R2.
I would go with the VF unit, it is a much nicer design, if they would have anounced it like 2 weeks sooner, I would have never bought my R2.
Grommit327
Well-Known Member
Another good thing about the VF unit is that it replaces the Axial outputs which are the only things that have been known to fail
bite me
Well-Known Member
hey Brian i've got a driveline disconnect you can have all you need to supply is a servo.thats the driveline, the shaft and the servo mount ... I won't need it after this weekend. I should have my VF dig, (got in on the early buy ,one of the very first to order it...) you can have the old stuff i've got, its a disconnect but not a lock...
Attachments
wheeler4x4samota
Well-Known Member
I ordered the VF Dig and yep still waiting for it lol
Grommit327
Well-Known Member
I ordered about 18 hours after they posted the sale and I'm still waiting too :booo:
Some people that ordered after me have already received theirs :booo:
