Terryjmatthew
Well-Known Member
Putting this back up for sale. Had it listed a while back and ended up blowing a headgasket while I was joyriding it. That has since been fixed and I am ready to move it.
91 GMC Syclone #1770 of 2995. 105K original miles. Body is "good" considering age and mileage. It does have a few dings in the front bumper, hood and now left door(while it was having the head gasket replaced). :cry:
The engine runs strong, but it does smoke a little. Could be rings or could be seals in the turbo gone?? Has no effect on the way the truck runs though. Truck runs out strong, shifts smooth, etc.
AC converted to R134a and blowing cold. Brand new Nexen tires with 100ish miles on them.
I'll try my best to list out the mods as best I can. Some I have verified myself and some info was from the previous owner.
-Eagle Rods with TRW forged low compression pistons .030 over
-Roller lifters and rockers
-Aftermarket larger turbo
-Aftermarket larger injectors
-Headers
-Dual fuel pumps?
-Lunati cam
-External wastegate
-larger intercooler
-Lowered 1.5" in the rear
-Ported and polished heads with oversized valves.
I'm sure there is some more I can't think of at the moment.
$10,000 obo
91 GMC Syclone #1770 of 2995. 105K original miles. Body is "good" considering age and mileage. It does have a few dings in the front bumper, hood and now left door(while it was having the head gasket replaced). :cry:
The engine runs strong, but it does smoke a little. Could be rings or could be seals in the turbo gone?? Has no effect on the way the truck runs though. Truck runs out strong, shifts smooth, etc.
AC converted to R134a and blowing cold. Brand new Nexen tires with 100ish miles on them.
I'll try my best to list out the mods as best I can. Some I have verified myself and some info was from the previous owner.
-Eagle Rods with TRW forged low compression pistons .030 over
-Roller lifters and rockers
-Aftermarket larger turbo
-Aftermarket larger injectors
-Headers
-Dual fuel pumps?
-Lunati cam
-External wastegate
-larger intercooler
-Lowered 1.5" in the rear
-Ported and polished heads with oversized valves.
I'm sure there is some more I can't think of at the moment.
$10,000 obo