How are you guys attaching your harness belts?

[SUPAFLY]

I'm installing new seats and 5 point harnesses this weekend, but my seats attach to the tub, and not the cage. I'm trying to figure a way to attach the lap belts and I'm leaning towards eye bolts with big washers underneath the tub. Any suggestions?

 

[pokey]

yep thats what I would do just weld the loop on the eye bolt closed or buy the ones from one of the belt companys that are a closed loop

 

[WHITE TRASH1]

I'm using angle iron bolted down on either side of the lap belt end. One side uses the stock belt mount nut and plate, the other side uses a bolt and 1/4" thick fender washer. The shoulder harness are looped around the crossbar.

 

[Binder]

Zip ties.....Just use the big ones, they're real strong.:awesomework:

 

[SUPAFLY]

Zip ties.....Just use the big ones, they're real strong.:awesomework:

Will do :flipoff:

 

[Cascade_Crawler]

mine are bolted to tabs on the cage

 

[no excuses]

Zip ties.....Just use the big ones, they're real strong.:awesomework:

just stay away from the harbor freight ones they tend to break when u need them most :awesomework:

 

[Jeepasaurusrex]

Get the harnesses that have the wrap around ends and connect them directly to the cage. Is your seats also integrated into the cage? Stay away from the bolt/snap in style. Just remember to position the belts correctly.