Now, before you turn away, remember, that this was my VERY first custom scale build to resemble Brock's Tacoma. I had a small time frame to get it done in class so I was rushing it when I shouldn't have been. It's not EXACTLY perfect but it's not all askew either.
This is also in no way a "Shelf Queen". This Honcho was built to be wheeled... HARD. If you see something that is bent, it's most likely battle scars. The other body has only been cut out but has not been painted or anything. Last night 1/8/13, I fixed the sliders and the broken tack welds. I love this truck but I'm ready for a change, like a scale Toyota FJ40 buggy.
I won't/can't sell: Receiver, LiPo, Winch
Specs:
SCX10 Frame
SCX10 Transmission
HPI Racing 27T
Robinson Racing 96T Spur
Axial 86T spur
Axial 20T pinion
Generic 15T Pinion (Stupid lower gearing)
Custom flatbed
Robinson Idler Gear
Junfac driveshafts
Jevne Racing CMS Plate
Custom CMS plate mount system with Panhard
Chino63 springs (they have been broken in but also have been VERY used)
RC4WD Hangers and Shackles
Custom traction bar and leaf spring mounting bracket
Comes with a pre-cut un painted body.
Cut 1.9 Iroks
Axial Beadlocks
Styrene Tool chest
Hobby Gear HiLift
1.9 Ripsaw
Hands Bros 3 Link bracket
Hot Racing Clockable Inner C's
Hot Racing Hi Steer Steering Knuckles
Hitec HS-5085MG
Axial/Castle AE-2 ESC
The things that it does need:
Overdrive gears if keeping the current gearing (does get a little under powered going up trails)
Receiver/ Radio, Winch (you can find on for $30, battery and charger
Finish up the red, white and yellow lenses for the rear flatbed panel.
If you need anymore pictures please don't hesitate to ask. $400 SHIPPED!!!
I have over $800 into this truck so you will be getting a STEAL!
This is also in no way a "Shelf Queen". This Honcho was built to be wheeled... HARD. If you see something that is bent, it's most likely battle scars. The other body has only been cut out but has not been painted or anything. Last night 1/8/13, I fixed the sliders and the broken tack welds. I love this truck but I'm ready for a change, like a scale Toyota FJ40 buggy.
I won't/can't sell: Receiver, LiPo, Winch
Specs:
SCX10 Frame
SCX10 Transmission
HPI Racing 27T
Robinson Racing 96T Spur
Axial 86T spur
Axial 20T pinion
Generic 15T Pinion (Stupid lower gearing)
Custom flatbed
Robinson Idler Gear
Junfac driveshafts
Jevne Racing CMS Plate
Custom CMS plate mount system with Panhard
Chino63 springs (they have been broken in but also have been VERY used)
RC4WD Hangers and Shackles
Custom traction bar and leaf spring mounting bracket
Comes with a pre-cut un painted body.
Cut 1.9 Iroks
Axial Beadlocks
Styrene Tool chest
Hobby Gear HiLift
1.9 Ripsaw
Hands Bros 3 Link bracket
Hot Racing Clockable Inner C's
Hot Racing Hi Steer Steering Knuckles
Hitec HS-5085MG
Axial/Castle AE-2 ESC
The things that it does need:
Overdrive gears if keeping the current gearing (does get a little under powered going up trails)
Receiver/ Radio, Winch (you can find on for $30, battery and charger
Finish up the red, white and yellow lenses for the rear flatbed panel.
If you need anymore pictures please don't hesitate to ask. $400 SHIPPED!!!
I have over $800 into this truck so you will be getting a STEAL!