Rock_Crusher
Well-Known Member
- Joined
- Mar 28, 2006
- Messages
- 2,297
can a jeep wrangler be lifted by doing a spoa... w/o the sye & cv shaft, *and drove on the street or wheeled?
anyone?
-----------------------------
can i drop the belly pan, re-adjust the driveline angle?
w/o getting terrible vibes or breaking u-joints - until i can get a sye kit.
running 33's w/ a somewhat light foot... using a 4.0 5-speed... would the rear hold up welded? until i swap in the 8.8 ford
whats the better idea to control axle wrap from a spoa set-up?
--------- thanks ahead of time, i'am reading ton's of info from vendor's / other jeep site's... but, figured i ask here - maybe someone w/ a jeep has a idea / advice to share... it's fairly easy to do a Spoa... but doing it right... or knowing how to do it the 1st time - just makes more sense to me. and saves me the headache, especially if you've already been there.
anyone?
-----------------------------
can i drop the belly pan, re-adjust the driveline angle?
w/o getting terrible vibes or breaking u-joints - until i can get a sye kit.
running 33's w/ a somewhat light foot... using a 4.0 5-speed... would the rear hold up welded? until i swap in the 8.8 ford
whats the better idea to control axle wrap from a spoa set-up?
--------- thanks ahead of time, i'am reading ton's of info from vendor's / other jeep site's... but, figured i ask here - maybe someone w/ a jeep has a idea / advice to share... it's fairly easy to do a Spoa... but doing it right... or knowing how to do it the 1st time - just makes more sense to me. and saves me the headache, especially if you've already been there.