Matt O's Ultra4 Buggy - EOR Racing #4462

Re: Matt O's S&N Fab Buggy Updates & KOH Prep/Rebuild

NICE... I wish you woulda told me you had a camera with you, you were coming back from the bents and dents area on the right side and catching some nice air coming over the "hump" at speed... looked cool as **** !

those pics would be awesome with the vroom vroom noises ! laughing1
 
Re: Matt O's S&N Fab Buggy Updates & KOH Prep/Rebuild

The new tube work makes your buggy look awesome.
 
Re: Matt O's S&N Fab Buggy Updates & KOH Prep/Rebuild

The body roll wouldn't bother me at all. It's a long race and I just don't predict the ability to take corners at speed will be much of an advantage. I'd bet it's all about being able to go fast in the desert without breaking your rig and being able to run the rocks smoothly. If limiting the body roll during turns prevents the axle from dropping (down travel) before landing I don't think it will be worth it.

That's my $0.02 anyway.
 
Re: Matt O's S&N Fab Buggy Updates & KOH Prep/Rebuild

looks great Matt glad everyone is getting early practice in
booyang
 
Re: Matt O's S&N Fab Buggy Updates & KOH Prep/Rebuild

vanguard said:
The body roll wouldn't bother me at all. It's a long race and I just don't predict the ability to take corners at speed will be much of an advantage. I'd bet it's all about being able to go fast in the desert without breaking your rig and being able to run the rocks smoothly. If limiting the body roll during turns prevents the axle from dropping (down travel) before landing I don't think it will be worth it.

That's my $0.02 anyway.
Click to expand...

Yeah, have you ever seen a trophy truck in a turn?? :eek:
 
Re: Matt O's S&N Fab Buggy Updates & KOH Prep/Rebuild

The axle gears are 4.88. i am not worried about the lil bit of lean, it is a rock crawler after all..
 
Re: Matt O's S&N Fab Buggy Updates & KOH Prep/Rebuild

I am SO glad I sent the Electric WP in for work, turns out it had a bad seal that let coolant get into the bearing and ruin it. Tech said that when they plugged it up to check it they knew it needed work right off because it was SO loud. Who knew it was not supposed to be loud as hell :flipoff1:

Anyways a complete rebuild for $100 is not bad in my book. New seals, bearings and an electrical connector. Tech said it probably was not pushing coolant worth a crap either and it should be much better now. Great service, I will get it back on Friday!!! Meziere Enterprises is the company that makes them, cannot wait to test the cooling out again after these small changes!

Also have one of these on the way from Howe, along with some new hose and fittings

inline-coolers.jpg


I think this will free up he precious grill space and help airflow a good bit, plus they look good and are tiny!
 
Re: Matt O's S&N Fab Buggy Updates & KOH Prep/Rebuild

Thats good new that thing sounded like it had sucked up a squirrel
 
Re: Matt O's S&N Fab Buggy Updates & KOH Prep/Rebuild

InDaShop said:
did you go with the trophy cooler? :eek: :eek: :eek: those things are big blanging!
Click to expand...

Nah, just the small one. He said the big one is only for use with the tropy truck pump. I am taking a few pics of my lines and setup to get his opinion on my setup. The pump whines when it leans over and I always spill a little fluid when it flops. Jeff gave me some ideas on those issues and has helped a ton. He also offered up competitor price when he found out it was for KOH. Cool guy that knows his stuff.
 
Re: Matt O's S&N Fab Buggy Updates & KOH Prep/Rebuild

Matt O. said:
Nah, just the small one. He said the big one is only for use with the tropy truck pump. I am taking a few pics of my lines and setup to get his opinion on my setup. The pump whines when it leans over and I always spill a little fluid when it flops. Jeff gave me some ideas on those issues and has helped a ton. He also offered up competitor price when he found out it was for KOH. Cool guy that knows his stuff.
Click to expand...

I am about to buy the same cooler from them, what did you give for the off road model? Jeff is a great guy and will give you the time of day when ask him questions. thumb.gif
 
Re: Matt O's S&N Fab Buggy Updates & KOH Prep/Rebuild

Retail was about $70, comp was $10 or so less. I am just going to use the rubber mounts they have recesses for. The billet tab was bangin, but not worth $35 IMO...

Steering and Cooling were the things I needed to get 100% and I think I am almost there. The rest is looks and safety requiremnts. My father in law tells me he has a banging selection of ambers for me to choose from!
 
Re: Matt O's S&N Fab Buggy Updates & KOH Prep/Rebuild

Dayum right ! NICE news Matt, way to stay on your game and get sorted dood ! That cooler is sexual, I think ambo has one............. :o


:flipoff1:
 

Latest posts

Random media

IMG_8395_3.JPG
Multi1.jpg
l_c56208d987524e978ff39e0cc9bde57d.jpg
pics 017.jpg
image.jpg
IMG_0142.jpg
IMG_8446[1].JPG
KOH 2013 With Clark (Copy).jpg
20170909_210207.jpg
Back
Top