Recentering h1 beadlocks.

Brian H · Oct 9, 2008

How hard is going to be and where do you cut the old centers?

If I do it I want to use these ones.
http://pirate4x4.com/forum/showthread.php?t=716226

Crazy Daze??????

cmud · Oct 10, 2008

It's not hard, cut the centers out with a plasma or torch. I used usa 6x6 centers, take a wire wheel and clean the rim where they seat, they center themself nicely. I really kike mine, I cut the mag run flats down, and can run real low pressures and they don't leak. Oh yea clean and lube the o-ring. Good luck

Brian H · Oct 10, 2008

cmud said:
It's not hard, cut the centers out with a plasma or torch. I used usa 6x6 centers, take a wire wheel and clean the rim where they seat, they center themself nicely. I really kike mine, I cut the mag run flats down, and can run real low pressures and they don't leak. Oh yea clean and lube the o-ring. Good luck

Do you have pics of yours?

Wildman1 · Oct 10, 2008

Search!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
http://www.nw-wheelers.com/forum/showthread.php?t=22442 :kissmybutt:

To help,

You take the outer ring and lay it in place then use the plasma cutter to cut it out. I didn't do such a grand job on mine but they turned out okay. I got in a hurry on one wheel so I have a clown wheel!! :redneck: