• Help Support Hardline Crawlers :

Ride Height Of Your Rig

lilyota

Well-Known Member
Joined
Sep 21, 2006
Messages
853
Location
Puyallup,WA
Whats you measurements from the ground to the bottom of your frame, and what tire size are you running.

mines a too tall 28" on 38s

Thanks in advance for your input:beer:
 
21 inch belly and 44's. I may jack it up another inch so i can jump higher.

Moto might be able to elaborate on this.
 
24"??? with 36" tires. But it depends on if you can drive or not. I roll a couple times a year, so I'm still learning. :redneck:
 
So you can jump higher...and break the rear yoke :fawkdancesmiley:

News flash. Binding cause the front breakage. I got a new yoke and 1410 sf joint on the way. Testing this weekend. If only i knew what i was doing when i had the front axle built.
 
25" to my frame, 75" to the top of my cab. maybe a little too tall for 33s. :redneck:

Maybe- But different vehicles have different frames. I know a Toyota will generally have a higher frame clearance than say, an S-10 blazer or Explorer or something. I think TJ's have decent height...

I will measure mine tomorrow....
 
17" belly, 69" top of cage, 39" tires

edit: it is 16 inches, how do i wheel this thing?
 
Last edited:
Stock JK Rubicon

13.5" ground to frame, 69" ground to hard top on 32`s bfg mud terrain km`s at 41 psi.:stirpot:
 
Top