These are sold pending payment, thanks to everyone for your interest.
Selling a Dana 60 Front and GM 14 Bolt Rear axle pair that was built to run on a Jeep CJ that I recently sold, they are completely built and ready to roll with a lot of new parts. Pictures were taken on 3/31/14, so what you see is as they are now. I left the brake calipers, pads, etc. off so they don't get damaged in shipping, but will gladly install for the purchaser if requested, otherwise I'll plan to ship them in a packaged box.
Dana 60 Front: 1981-1987 Chevrolet 1 Ton 4wd Passenger Side Drop (has the larger axle shafts) K30 1 Ton 4wd, Passenger side differential, regular rotation (low pinion) gears, disc brakes, 35 spline inners, 30 spline outers, internal style hubs, and kingpin knuckles.
New Parts List:
New 5.38 Yukon Gears
New Detroit Locker
New Timken wheel bearings and seals
New Timken ring and pinion bearing kit
New Spicer axle seals
New Spicer spindle bearings and seals
New Brake Rotors
New Calipers
New brake Pads
GM 14 Bolt Rear: GM "corporate" 14 Bolt (14b) full-floating rear axle, 10.5" Ring Gear, SRW hub
New Parts List:
New 5.38 Yukon Gears
New Detroit Locker
New Disc Brake Conversion
New Timken wheel bearings and seals
New Timken ring and pinion bearing kit
New Brake Rotors
New Calipers
New brake Pads
Will take $3,300 for the pair. Local pick up is free, will send freight quote at your request. Located in Chelsea (Bham), AL. Not looking to split them up.
Call Brandon @ 205-365-6194. Please do not call after 9:00 PM CST.
Selling a Dana 60 Front and GM 14 Bolt Rear axle pair that was built to run on a Jeep CJ that I recently sold, they are completely built and ready to roll with a lot of new parts. Pictures were taken on 3/31/14, so what you see is as they are now. I left the brake calipers, pads, etc. off so they don't get damaged in shipping, but will gladly install for the purchaser if requested, otherwise I'll plan to ship them in a packaged box.
Dana 60 Front: 1981-1987 Chevrolet 1 Ton 4wd Passenger Side Drop (has the larger axle shafts) K30 1 Ton 4wd, Passenger side differential, regular rotation (low pinion) gears, disc brakes, 35 spline inners, 30 spline outers, internal style hubs, and kingpin knuckles.
New Parts List:
New 5.38 Yukon Gears
New Detroit Locker
New Timken wheel bearings and seals
New Timken ring and pinion bearing kit
New Spicer axle seals
New Spicer spindle bearings and seals
New Brake Rotors
New Calipers
New brake Pads
GM 14 Bolt Rear: GM "corporate" 14 Bolt (14b) full-floating rear axle, 10.5" Ring Gear, SRW hub
New Parts List:
New 5.38 Yukon Gears
New Detroit Locker
New Disc Brake Conversion
New Timken wheel bearings and seals
New Timken ring and pinion bearing kit
New Brake Rotors
New Calipers
New brake Pads
Will take $3,300 for the pair. Local pick up is free, will send freight quote at your request. Located in Chelsea (Bham), AL. Not looking to split them up.
Call Brandon @ 205-365-6194. Please do not call after 9:00 PM CST.