Stout Drivelines...

[JAWS]

What do you guys use to build drivelines out of i keep twisting mine in half...

 

[Boonie Buster]

What are you using?

 

[crash2]

1 1/2" poop pipe or 1 1/2" .120 dom

I bent a .120 rear shaft once to the right of the crack at funny rocks a number of years ago after a hard smack. Stuck it into a press and continued to run it for a couple more years. Now Its hard to smack my driveshafts.

 

[CHOP SHOP]

What are you using?

x2

 

[JAWS]

What are you using?

Stock tubes. cut or lenghtend.. Should i use dom tubing?

 

[CHOP SHOP]

Stock tubes. cut or lenghtend.. Should i use dom tubing?

stock tubes from???????

You need toyota drivelines!!:haha:

 

[white-rhyno]

I cut my stock toy shafts in half. Then slipped some 2" sched 40 inside the the factory shaft. Looks goofy but works great.

 

[JAWS]

stock tubes from???????

You need toyota drivelines!!:haha:

Stock thickness driveline tubes.. I guess ill try some DOM next:awesomework:

 

[JAWS]

I cut my stock toy shafts in half. Then slipped some 2" sched 40 inside the the factory shaft. Looks goofy but works great.

Ive done that in a pinch..

 

[CHOP SHOP]

are you twisting them off? or bending them? or twisting them but not off?

Any dents or marks or abrasions on the tubes that you can see?

If I see a dent in mine I will retube it before hitting the trail again.

You can do thickwall if you are hitting them on stuff.

Like crash said, they last long time if they are out of harms way.

 

[Damnyankee]

aukeem in kent did 2 for me, they have held up well 1 has been dented for several years,, and no issues.

of course i don't have V8 power.

 

[JAWS]

are you twisting them off? or bending them? or twisting them but not off?

Any dents or marks or abrasions on the tubes that you can see?

If I see a dent in mine I will retube it before hitting the trail again.

You can do thickwall if you are hitting them on stuff.

Like crash said, they last long time if they are out of harms way.

Twisting them in two no dents my drivelines are high and out of harms way for the most part....

 

[leadfoot067]

still running stock tube in the rear, and i have a high angle driveline up front,its made of the thicker stuff. we built one for don several years ago from the 2 1/2 poop pipe and its still working great!

 

[boardbysled]

I cut my stock toy shafts in half. Then slipped some 2" sched 40 inside the the factory shaft. Looks goofy but works great.

We have done this on several yota driveshafts, works good, nice tight fit.

 

[megatoy66]

I have a rear driveline made out of a piece of galvanized fence post pipe...........works great!

 

[Money Mark]

Tom Wood's......you cheap skate.