RogueFab
Well-Known Member
We have redesigned the H1 wheel center to capitalize on the now affordable 24 bolt staggered pattern load range E H1 beadlocks. These heavy wheels are very tough and can hold 60 PSI if you want to. We have customers who have bent our standard centers, pressed centers, regular steel beadlocks, etc. We got to work and put some real engineering and analysis into this new design. After many many hours of weight reduction and stress simulations, we have arrived at a wheel center that is 4.3 times stronger than anything on the market and weighs in at only 1.8 lbs heavier. We recommend building these with our full rock rings and new inner rock rings for a bulletproof setup.
We sell these wheel centers as weld together kits only.
The gussets are a fabricated tapered I beam, and are very easy to assemble. All the parts are keyed together. The weak point in H1 wheels is right outside the hub area, and we reinforced that area with gusset webs that connect that part of the wheel to the steepest taper in the wheel. This brings all that rigidity right to where the wheel wants to bend, and gives it the huge strength improvement.
Reply with your zip code, wheel quantity, and if you want inner and outer rock rings for a quote. These are builder kits only. If you need wheels and can't find any, PM us. We can help you source them.
We sell these wheel centers as weld together kits only.
The gussets are a fabricated tapered I beam, and are very easy to assemble. All the parts are keyed together. The weak point in H1 wheels is right outside the hub area, and we reinforced that area with gusset webs that connect that part of the wheel to the steepest taper in the wheel. This brings all that rigidity right to where the wheel wants to bend, and gives it the huge strength improvement.
Reply with your zip code, wheel quantity, and if you want inner and outer rock rings for a quote. These are builder kits only. If you need wheels and can't find any, PM us. We can help you source them.