Tire Grooving...

[dirtygoat]

I've been looking at different patterns to groove...

I've got a set of TSLs on my 4runner that is grooved through the wear bars on the centers and diagonally on every other outer lug leaving the small ones intact...

I'm getting ready to take the iron to my 38.5 SXs and was thinking about something like this... Or like the 42s that Robin has for sell...

But, then I saw these and started thinking...

What do you guys think???

 

[nevada]

heres mine.
same as urs, 38.5 SX's

was a night, and day difference after i cut them.

 

[Bunk1]

I wouldnt do "The eastcoast cut" unless you can afford a new set of tires every year. Triple cutting the chevrons with a wide iron and then a good pattern on the outer lugs should do the trick.

 

[Bunk1]

heres mine.
same as urs, 38.5 SX's

was a night, and day difference after i cut them.

Nice leaf packs.:fawkdancesmiley:

 

[nevada]

Nice leaf packs.:fawkdancesmiley:

:fawkdancesmiley:
thanks:redneck:
i did what it took, when i was poor/broke:awesomework:

 

[Fattz]

the cuts on the buggy look like they would grip the hell out of some stuff....

 

[dirtygoat]

So, I think I'm gonna go with the same pattern that is on Robin's 42s...:awesomework:

 

[SUPAFLY]

Heres a before and after of what I did to mine. Its a lot of work, but seems to work well.

 

[dirtygoat]

Heres a before and after of what I did to mine. Its a lot of work, but seems to work well.

Yeah, that's what I'm doing...

 

[44newman]

Heres an option

 

[dirtygoat]

Yeah, I saw that one in my searching...

 

[dirtygoat]

Here's what I decided on...

 

[BOVADS]

where you guys getting your tire irons?

any pics of grooved mtrs's?

 

[militaryota]

got mine from azracemart.com less than $60

 

[dirtygoat]

I'm using a buddies speedway groover... It's about $70...

 

[nevada]

I'm using a buddies speedway groover... It's about $70...

thats what i used...