smbroady82
Well-Known Member
so Jackson and I took the trans and cases out when I trashed the cases last time (again) , I got the new one mated up (everything on the cases shifts fine) and we reassembled everything
alright so here is the issue: It will not shift into 1st or Reverse, I've tried every little trick I know. I replaced the shifter bushing and shifter seat (that didn't work either), I put a new clutch in while I had it out, bled the clutch and all that jazz. I had all my gears forward and reverse before we tore into it.
Any ideas? Could the trans being low on fluid cause this? I haven't refilled the cases with fluid but don't know why that would have any affect on it. Grasping for straws here, any help would be much appreciated.
Thanks
alright so here is the issue: It will not shift into 1st or Reverse, I've tried every little trick I know. I replaced the shifter bushing and shifter seat (that didn't work either), I put a new clutch in while I had it out, bled the clutch and all that jazz. I had all my gears forward and reverse before we tore into it.
Any ideas? Could the trans being low on fluid cause this? I haven't refilled the cases with fluid but don't know why that would have any affect on it. Grasping for straws here, any help would be much appreciated.
Thanks