twizt3dfuc
HL2OG
- Joined
- Aug 11, 2013
- Messages
- 689
80% finished and As much as I hate it, I don't have time to finish this and as of recently money is more important, so here it goes. This buggy is not finished(I repeat not finished) it needs to be wired up, finished painted, hydraulic hose for steering and fuel lines.
Will also need a steering wheel, I have a psc 9" column for it with disconnect but no wheel. Needs drive shafts cut to length, Kevin stretched it a bit.
Buggy was built from 80's Toyota pickup frame, up is tube. Has 20r(was told it smokes and needs rebuilt, but does run when Kevin stripped it down, w56 trans with 4.7 tcase, 35 cut boggers, has seats(name brand I have no idea), and will come with cam lock harnesses. 19 gallon fuel cell. Has cut out on dash for all in one electronic gauge cluster. It is built big enough for a child's seat in the rear.
$3000, located in Phil Campbell Al.
2563248890, call or text any day after 2pm until 4am (I work nights)
Has skins that need to be mounted to chassis, in the pictures I have them taped so I could see what I was looking at.
Sent from my Nexus 6 using Tapatalk
Will also need a steering wheel, I have a psc 9" column for it with disconnect but no wheel. Needs drive shafts cut to length, Kevin stretched it a bit.
Buggy was built from 80's Toyota pickup frame, up is tube. Has 20r(was told it smokes and needs rebuilt, but does run when Kevin stripped it down, w56 trans with 4.7 tcase, 35 cut boggers, has seats(name brand I have no idea), and will come with cam lock harnesses. 19 gallon fuel cell. Has cut out on dash for all in one electronic gauge cluster. It is built big enough for a child's seat in the rear.
$3000, located in Phil Campbell Al.
2563248890, call or text any day after 2pm until 4am (I work nights)
Has skins that need to be mounted to chassis, in the pictures I have them taped so I could see what I was looking at.
Sent from my Nexus 6 using Tapatalk