I'm ready to start pulling wire on the jeep and wanted to layout my wiring on paper before I started to hopefully minimize wasted fittings and wire. This is my first attempt at a full rewire and drawing a wire schematic so don't be to hard on me . This is on a 1980 CJ7 with a tbi350. I had the wiring harness cut down and computer flashed already so some of the references you see on the drawing are for wires coming out of the harness. I didn't put the gauges on here since they're all mechanical. You'll also notice there are a few spaces left blank for fuse size and that's due to me not knowing what size fuse to put in there. I'll post the drawing through tapatalk since photobucket is being difficult.