Working backwards.

[crash2]

So one problem I am having with kyles new rig--the servos are working backwards--basically you gotta turn the radio the opposite direction that you had to origionally :eeek: Was clockwise to turn right--now its clockwise to turn left

 

[VMGontheRocks]

Change the servo reversing on the radio. Should be a little switch. If I new which radio I could direct you even easier but I think you should be able to find it.

 

[crash2]

Its just a tq3 and I don't see a switch :eeek:

 

[VMGontheRocks]

Its just a tq3 and I don't see a switch :eeek:

Very bottom to the right of the on off switch.

 

[skrause]

Or pop the radio open and reverse the pot for that stick or it's wiring.

 

[Double J]

the tq3 has a reverse switch on the bottom.

 

[Double J]

you can see it in this pic.
right under the traxxas lettering on the bottom.

 

[Tanis]

And steering is Channel 1, ESC is channel 2:;

 

[Todd1803]

Leave it to Tanis to give up that one little piece of omitted, yet important, information.

Guess maybe you earned some of those accolades after all :hi: :haha: