ZJ Cage and fender flairs

[shotmobile]

Didn

 

[shotmobile]

On Wednesday I was able to work for a few hours and got the upper part of the

 

[shotmobile]

This weekend I worked on the rear smaller

 

[heep70]

Nice work! :awesomework:

 

[Boonie Buster]

looking good mang! :cool:

 

[Spanaway Mudder]

Nice looking cage man...

How many kids/passengers do you plan on having in there with ya?

Why not fab up 2 bucket seat mounts for the rear, that way they are strapped in and alittle more comfort like the fronts.. plus it free's up alittle space in the center..

 

[NotMatt]

Damn man nice work... I'd roll down the side of a mountain in it!

 

[shotmobile]

Thanks Guys.

I've got a 3 kids that will be riding in the back. So no bucket seats back there.

 

[Boonie Buster]

Thanks Guys.

I've got a 3 kids that will be riding in the back. So no bucket seats back there.

If you dont want to put them in buckets you could always get drums, much larger than buckets. :awesomework::redneck:

 

[Spanaway Mudder]

If you dont want to put them in buckets you could always get drums, much larger than buckets. :awesomework::redneck:

:haha::haha::haha::redneck:

 

[shotmobile]

Last night I was able to work for a while and got most of the "X" weaved in between the top rails. I got all but the very last piece of the entire cage done. Then I get to weld it all together. I used a piece of OSB that had a straight edge to lay out the "X" pattern. It worked great because it could bend the follow the roof and still have a staight line.

 

[machinist]

looks good :awesomework:

 

[shotmobile]

Got a lot done this weekend. I

 

[shotmobile]

 

[heep70]

WOW, Nice :awesomework::beer:

 

[NotMatt]

If it were me, I would try to fit a tube under the fender and tie the A-pillar in with your ARB bumper... that would tie the front end in with the rest of the cage and stiffen up the unibody quite a bit, I would think.

I think it turned out really sweet dude.

 

[jbugher]

Great job!

 

[shotmobile]

Well it's done. :rock: All buttoned up and ready to go play for the weekend. Here are some final pics.

Here is the link to the album of the 348 pics I uploaded of the entire project.

http://s241.photobucket.com/albums/ff216/shotmobile/ZJ Cage/

 

[heep70]

That look fantastic. :awesomework: Great job :beer:

 

[CHOP SHOP]

If it were me, I would try to fit a tube under the fender and tie the A-pillar in with your ARB bumper... that would tie the front end in with the rest of the cage and stiffen up the unibody quite a bit, I would think.

I think it turned out really sweet dude.

Wouldnt that make it an exo then?:corn:

 

[machinist]

nice job looks good :awesomework:

 

[timothy]

If it were me, I would try to fit a tube under the fender and tie the A-pillar in with your ARB bumper... that would tie the front end in with the rest of the cage and stiffen up the unibody quite a bit, I would think.

I think it turned out really sweet dude.

X2 Deffenently, I, see extra toob:rolleyes::awesomework:

 

[Lincolnlock]

Dude! That is a crap ton of work! I really like the way it turned out. It reminds me of my old Land Rover Discovery. :cool: