Wanted to apologize!!!

[UncleCracker]

Hey I wanted to apologize for going off on you guys yesterday. I knew ya all was just screwing around, I was just having an extremely bad day and it just kept getting worse and worse.

I usually have thicker skin, it just caught me the wrong way, on a bad day.:mad:

Anway.......... hug hug.. pat.. pat, all that crap and again I am sorry.


Cracker.



Oh by the way Shane, I am not lazy, I am just so sick and tired of working on this thing, I just want it out of my life. I bought a lemon, and its non-stop repairs, this could push me into buying a jeep. So........... :fawkdancesmiley:

 

[notstock]

We all have those days, I know you are not normally an angry person.

 

[skrause]

:kiss: :awesomework: It's all good in tha' hood.

 

[UncleCracker]

Just FYI... I re-did my add and had 3 calls on my rig, went out to go meet a guy and the started is now messed up.... Atleast that is what I am guessing.

Turn the key, nothing but a metal to metal grinding noise. So I pulled the starter, cleaned the oil and grease off it, than took it so schmucks, its barely putting out half the volts as it should and it sounds like there is sand in the bearings, but it still passed. I don't know whether to throw it back in and try it out, or wait a few days till I have the money to buy a new one. Its my daily driver, but my job is really flexible.

Any ideas? I am wondering if it is something internally grinding on the starter, there was no wear or scarring on the teeth of the starter.

 

[crash2]

Its all good :awesomework:

 

[skrause]

Just FYI... I re-did my add and had 3 calls on my rig, went out to go meet a guy and the started is now messed up.... Atleast that is what I am guessing.

Turn the key, nothing but a metal to metal grinding noise. So I pulled the starter, cleaned the oil and grease off it, than took it so schmucks, its barely putting out half the volts as it should and it sounds like there is sand in the bearings, but it still passed. I don't know whether to throw it back in and try it out, or wait a few days till I have the money to buy a new one. Its my daily driver, but my job is really flexible.

Any ideas? I am wondering if it is something internally grinding on the starter, there was no wear or scarring on the teeth of the starter.

Pop contacts out and clean them up, might be enough to get it working again.

 

[Trailtoy1993]

Oh by the way Shane, I am not lazy, I am just so sick and tired of working on this thing, I just want it out of my life. I bought a lemon, and its non-stop repairs, this could push me into buying a jeep. So........... :fawkdancesmiley:

Welcome to wheeling man! Doesn't matter what you buy if you take it off the pavement things break!

Have a good one man! Good luck!:awesomework:

 

[UncleCracker]

Pop contacts out and clean them up, might be enough to get it working again.

hmmmm gotta figure out how this thing comes apart now... what do I got to loose right?? Learning expierence

 

[skrause]

hmmmm gotta figure out how this thing comes apart now... what do I got to loose right?? Learning expierence

three little screws, tin cap, you'll figure it out. I got faith in you maaaan. :awesomework:

 

[UncleCracker]

Just figured out my g/f left in her truck, to do some grocery shopping, left her Cell at home, and my starter is in the back of her truck!!! :mad:

 

[UncleCracker]

Pop contacts out and clean them up, might be enough to get it working again.

I might take ya up on that kidney deal, I am gonna need one here in a few years.

 

[boxboy]

Oh man did I miss a good thread someplace? :booo: :booo:

 

[crash2]

Oh man did I miss a good thread someplace? :booo: :booo:

Na---just a lil screw up--but its all good now

WAIT--get yer azz off the pc and back to work

tick tock tick tock:awesomework:

 

[2pwrlftrs4u]

Oh man did I miss a good thread someplace? :booo: :booo:

yep :haha: