Recent content by chrissybf86

yea thats next. funny thing is that i took apart the fuel system to find it plugged. all the injectors has dirt and stuff in it, the filter was full, and fuel line was full, i kinda think its the foam in the fuel cell but idont know i am just going to clean all i can, throw 2 filters on, 1...

The plugs are black. And a little wet. I played with the timing. Tryed to set it at 5deg btc and it would idle but once u hit the gas it would back fire I might pull the valve cover and check timing marks.

So I just picked up a truggy its a 84 ext cab with newer dash and 22re. I guess it ran good. But does not now. It seems like its missing cly 3 I've changed the plugs. No change. The distributer was wired together using house twist ties. So I fixed that. It has a few plugs that's not used just...

looks good out there.. i wanted to go but no one told me untill they were leavin.. i need to atleast find a 8.8 before i do any jumping lol.. i might be down this weekend to pick up some joints.. i figured ill just long arm the rear of the jeep and finish it off.

cant mess it up to bad... there is a car show in sunnyside this comming weekend

u really did not miss much this last weekend.. besides robs rear end not working. other than that it was kinda fun to go run a easy canyon. i plan go go this weekend just so i can have fun for one last weekend before the shutdown. here is my poser i need gears lockers, i stalled out twice...

i am thinkin webber, its easy, and u have little to no chance to scrach it up. and u can use test it out on the hard lines. should be cake walk for that thing i just want pics.

when u going to test it?? i want to see it in action.. :awesomework:

have no had any time to mess with the heep.. since i got a new job. i hope to mess with it this weekend.. maybe change out the springs to, hers a poser shot..

yea i checked it out.. i think i got my turbo stuff figured but i am still working on the drive train.. like suspension and axle placement.. right now its a little too tall for what i want. and the wheel base is stock. i want to move the front forward and get some new tires before i tear into...

yea i planed on using all the heat sheilds i can. and rap all the pipes and charge tubes. i build and tune a lot of diffrent cars, so i have some exp just looking at diffrent set ups to see what people have done in the past, other possiblilties is the side mounted m90 supercharger off the...

all done... i am running the rc 4.5 inc lift with one leaf removed. and i cut down the shackels to stock length, after this snow is done i plan to miove the front end forward and a shackel reversal. i had to get the rear drive line lengthend 1 3/4 inc took six states less then 2 hours to get...

the 410 grill would be sweet!.. the wheel and tires are perfect look for the buggy.. i can wait to see it get beat on the trail..

idk mike its the cheapest wheeler ive been in to.. well so far... with all the axles and stuff to put it under there iam only out of pocket about 400 might be a little weak on the power side. but i am hopeing the turbo will help if not i have dibs on a chevy vortec 4.3. how it sets.. rear is...

got the front/rear end ready to go in.. just need to go see my buddy at the local parts store for some perches, ubolts. stainless brake lines. maybe u joints.. idk yet