SAS Q's

Orangecrush87 · Jan 29, 2010

hey crazy mind showing where you blew through the frame on the front end of that toyota? Curious so i can check my shackle location? i put mine dead center of the cab mount on an 87, and curious if i did it correctly?

CHOP SHOP · Jan 29, 2010

Orangecrush87 said:
hey crazy mind showing where you blew through the frame on the front end of that toyota? Curious so i can check my shackle location? i put mine dead center of the cab mount on an 87, and curious if i did it correctly?

he didnt. that truck came stock with a straight axle.

jeepdarinx · Jan 29, 2010

Crazy Daze does some of the cleanest work ive seen around and has built me a few things for my rig and i recommend him to anyone, very clean work better then anything you could buy off the shelf, and very reasonable pricing not over the top at all.

starkinthedark · Jan 29, 2010

jeepdarinx said:
Crazy Daze does some of the cleanest work ive seen around and has built me a few things for my rig and i recommend him to anyone, very clean work better then anything you could buy off the shelf, and very reasonable pricing not over the top at all.

X2.... cory is a buddy of mine and has always done a nice clean job, and is very reasonable, and very knowledgeable also.:awesomework:

Corey Y · Jan 29, 2010

From the center of the front bolt to the center of the frame sleeve mine is 45.5" it is a 1985.

Orangecrush87 · Jan 30, 2010

Thank you much for the picture, i got mine leaned forward atm but thers no axle or anything on it. Im hoping the pressure when i put the axle under it and all will put it back to where it needs to be at. Thanks again for the picture you rock!