Misc cage pics.

I was asked to post up some pics of my roll cage so another user could see them. Red cage is YJ. Green one is TJ. I'm too lazy to take the top off, as it's getting cold, and the top is a PITA

more

and,

TJ..

plus

Hope this helps.

If it matters, the Green TJ cage is going to get a major rework in the next few weeks. Might even sell it complete and start over. The TJ cage also locates the OEM door surrounds and top sides.

Also, the red cage is tied into the frame at all the OEM locations, plus 6 more locations, once at the A pillar, and once at the C pillar, and thirdly thru the fenderwell behind the seats and into the frame just in front of the rear tire.

The green cage is only tied into the frame at all the OEM locations, plus 4, the A & C pillars (for now)

The picture of the allen head cap screw is because the rearmost cross bar goes over the top of the tool box, which sits behind the rear seat (not shown) and needs to be removeable in order to access the contents of the tool box.

TreeClimber said:

The picture of the allen head cap screw is because the rearmost cross bar goes over the top of the tool box, which sits behind the rear seat (not shown) and needs to be removeable in order to access the contents of the tool box.

Click to expand...

ok... so... if the tools are properly stowed into the tool box, how do you get to the tool to tighten, or losen, the bolt to remove it to gain access to the box???

:fawkdancesmiley:

just saying...

hehe

:redneck:


but, on a different note... nice looking cage there...

Zoediak said:

ok... so... if the tools are properly stowed into the tool box, how do you get to the tool to tighten, or losen, the bolt to remove it to gain access to the box???

:fawkdancesmiley:

just saying...

hehe

:redneck:


but, on a different note... nice looking cage there...

Click to expand...

That one T-handle wrench is also the latch for the swingout spare tire carrier, which has to first be opened in order to access the tool box.

Both look good and stout.

Why are the harnesses on the red cage held up with string?

skinny_pedal said:

Why are the harnesses on the red cage held up with string?

Click to expand...

So you don't have to reach behind you on the floor to find them. The TJ has Mastercraft suspension seats, which have harness loops. The YJ (pictured) has YJ factory seats, hence, no provisions for harness.

Gotcha, for a second I thought thats how the uppers were mounted. But that doesn't seem like something you would do.

Nicely setup rigs.

As requested:

TreeClimber said:

As requested:

Click to expand...

uke:

is that so you can plug that massage cushion in on your jeep?