Grizzly locker WTF?? Yukon NO HELP!!!

Beerj said:

Click to expand...

How the hell you gonna take what I said and modify it to say something else and put it in your signature. Son of a motherfuckin Yankee ass bastard. I think I felt a little piece of me die inside just seeing that ****.

pholmann said:

How the hell you gonna take what I said and modify it to say something else and put it in your signature. Son of a motherfuckin Yankee ass bastard. I think I felt a little piece of me die inside just seeing that ****.

Click to expand...

Now that's funny. :****:

leeadam94 said:

Yukon sucks!!! RCV for the win


Sent from my iPhone using Tapatalk

Click to expand...

Ooo Wee.....are those RCV full floater shafts for a late 60's model offset rear DANA 44

Again, not a misunderstanding but a difference of opinion....

You guys call me a troll but you seem to have a need to keep it going...

I made two posts.... Had I not been attacked I would have left it at that.

I didn't intend any insult but apparantly managed to come across that way..

Certain internet ninjas seem to be on here with the sole purpose of confrontation...

Seems like maybe we could just drop this chit n move on aye?

gottagofast said:

Again, not a misunderstanding but a difference of opinion....

You guys call me a troll but you seem to have a need to keep it going...

I made two posts.... Had I not been attacked I would have left it at that.

I didn't intend any insult but apparantly managed to come across that way..

Certain internet ninjas seem to be on here with the sole purpose of confrontation...

Seems like maybe we could just drop this chit n move on aye?

Click to expand...

That's right......I wouldn't want to piss off Santa either. Or the Easter Bunny!!

Re: Re: Grizzly locker WTF?? Yukon NO HELP!!!

offroadwerks said:

That's right......I wouldn't want to piss off Santa either. Or the Easter Bunny!!

Click to expand...

Thank God you didn't say tooth fairy. I was gonna cut the cord.

Sent from my SM-S920L using Tapatalk

pholmann said:

How the hell you gonna take what I said and modify it to say something else and put it in your signature? Hilarious. You, good sir, have demonstrated radical proficiency in the art of humor. For that and to you, I tip my hat.

Click to expand...

Awwww, cmon man, you're making me blush.

Beerj said:

Awwww, cmon man, you're making me have strong feelings for you in a more than a friend kind of way. :-*

Click to expand...

Man I'm flattered but I'm straight. I know **** like that's acceptable up north and all but I'm going to need you to keep your distance ya ****in homo.

Touchè

Thanks yukon

cushmaneaglerider said:

I am not trashing! See, you still do not get it. I may have to get Kush to explain it to you. I am very disappointed. From what I can tell you think it would be ok for me to buy a locker from brand X company with a receipt. Take all the bolts out, throw them in the differential, put the cover on and see how long it last. And just because I have a piece of paper they should or be ok with warranting it? That's not only wrong but stupid. I do not think I will understand your thinking or really want to even try. Their product failed! It's just that simple.

Click to expand...

Let me at Em! Somebody want an Internet ass whippin ? I make moves on da keyboard.
The moral of the story is... Good guys finish last. Like always. Ya gotta be a liar and thief to get **** done these days I guess. For real tho. My parts plug did tell me a while back that yes Yukon had a lifetime warranty on certain things. But he strongly advised buying from a vendor that would stand behind it and deal with Yukon instead of the customer .. Now I know why he said that.
Oh and Lee , that was a cute axle set you posted up. Brad prob didn't tell you... But breaking a D30 isn't really hard. I'd imagine one stab of the gas to get over the tires/fenders on tha trailer unloading could grenade that axle. Hahahahaha atleast with them RCV's you can make that hop over the tires/fender now. .
I still bet you anything Lee had something to do with this. I mean, really if ya think about it this has LEE written all over it. Dammit LEE.

I will be now goin to garage to sit and wipe tears outta my eyes looking at my Walmart build. Dam u redneck eng! Hahaha god that man has a way with words. Had me laughin so hard my wife thinks im tarded. Which is nothing new if ya can believe that. Aight. Well I'm loadin up and going to butt rape morris mountain for a few hours. I may take a pick ax and dig a lil ditch to drain "punisher" and back up it ... Y'all keyboard bitches have a good day.
Oh and **** YUKON! cheap grabage. Matter of fact. Yall are stupid if yall don't take any Yukon parts you may have out of your rig.. And send them to me. Ill pay shipping.

Re: Re: Grizzly locker WTF?? Yukon NO HELP!!!

kmcminn said:

Thanks yukon

Click to expand...

Hahahaha **** yeah!

Always turbo LEE fault!!


Sent from my iPhone using Tapatalk

leeadam94 said:

Yukon sucks!!! RCV for the win


Sent from my iPhone using Tapatalk

Click to expand...

Wow. I would run stock shafts before I put that garbage in my rig. Shafts aren't even profiled correctly SMH

Damn....you guys are ruthless. :

Maybe you can take a hacksaw and put some stress relief cuts in it?

Re: Re: Grizzly locker WTF?? Yukon NO HELP!!!

redneckengineered said:

Wow. I would run stock shafts before I put that garbage in my rig. Shafts aren't even profiled correctly SMH

Click to expand...

C'mon now, rcv said they wouldn't break!

(And they are probably stronger than a d44 ring gear, or wheel hub..maybe)

Actually judging by the pic that Mike (5bros) posted of his d44 hub breakage, I'd guarantee it.

I question why RCV would make them that way?

They seem to actually be on the ball with making a good product, the correct way...but then there are those shafts? I wonder what their reasoning is (if its anything other than $$$)...they clearly have the ability to make shafts the correct way, and they clearly have the ability to offer a product that is one of the better ones out there (among a few others).

At the point of them making shafts like that...what makes that any different than a regular old walmart cromo shaft?

Did those shafts cost more than yukons? Do all RCV shafts look like that, and I am just mistaken that these are not how they normally are?

slravenel said:

I question why RCV would make them that way?

They seem to actually be on the ball with making a good product, the correct way...but then there are those shafts? I wonder what their reasoning is (if its anything other than $$$)...they clearly have the ability to make shafts the correct way, and they clearly have the ability to offer a product that is one of the better ones out there (among a few others).

At the point of them making shafts like that...what makes that any different than a regular old walmart cromo shaft?

Did those shafts cost more than yukons? Do all RCV shafts look like that, and I am just mistaken that these are not how they normally are?

Click to expand...

Agreed. Are the ones in that picture Yukon or RCV?