What tire pressue do you run?

I need Hardlines input on tire pressure.

-What tire pressure do you run
-Tire size
-Wheel size
-Rig weight
-Style of wheeling i.e. (racing, bouncing, crawling, good old fashion trail riding)

12-15psi, strip down stockish tj on 35x12.5/15 LTBs on 8" wheels. I daily drive occasionally and mix trail riding and crawling.

8psi in my 42" treps on Racelines. Rig weighs 4500-ish lbs. Trail riding and crawling. Work great at that pressure.

43 stickies on racelines. I stay around 12 because when I go full retard I don't wanna break a wheel.

4-6psi depends on terrain. 38" TSLs on 8" wheels on a full bodied XJ. I'm a trail ride.

33x12.5x15 radial on 15x10 bead locks, full body xj- 12 psi to save the sidewall
33x13.5x15 bias tsl's-same setup as before, 8psi

39.5x13.5x16 iroks on 16x8 superduty takeoffs, chopped up 1ton xj probably in the 5k range- 15psi or I could lose a bead at will.
44x18.5x16.5 tsl's on recentered h1's, same jeep as before- 8-10psi depending on what they've leaked down to.

33x12.50 coopers, 15x8's on a xj buggy thing. About 12-15 lbs. trail riding/too much skinny pedal

Re:

I've run 39 Red labels around 5 psi on a light Sami. It barely had enough motor to even trail ride.

Sent from my SM-S903VL using Tapatalk

43"sx on racelines 3.5#. Weight unknown. Crawling with occasional beat downs.

I used to run 4-5 psi in my 34" LTB's on my Samurai. I was running 15x8 reversed center wheels.

4500 pound rig. 43 std sx on double beadlocks.
Normally I start the day with 10-15 by the end of the day they leak down to 5ish :****:

Eddyj said:

4500 pound rig. 43 std sx on double beadlocks.
Normally I start the day with 10-15 by the end of the day they leak down to 5ish :****:

Click to expand...

So do they do better at the start of the day or end of it?

Kick and jiggle

Molly Hatchet said:

Kick and jiggle

Click to expand...

That's like my measurement. I fill the flat tires up enough to make a roundish shape and call it good.

6 -7 Psi in the front

4 -5 Psi In the rear

44" Cut Boggers

15" Steel wheels, outside beadlock

I guessing 4000 - 4300lbs

Crawlin, trail riding

5600 # truggy, 38/15/16.5 TSL/Boggers on 9" beadlocked wheel. I run 15# or so. She's a big girl so it helps protect from pinch flatting.

4900#
43"stickies
H1s
3-4psi for trail riding and 10-15psi for obstacle course racing.

jk101 said:

So do they do better at the start of the day or end of it?

Click to expand...

Well I get progressively stupider as the day goes on while I am wheeling. So it's hard to tell.

Re:

Toy rig, 38.5×14.5×15 sx's. Run 8, had to use duck tape on the inner bead. They would burp out and cause a flat a lot of the time

Sent from my SM-G935V using Tapatalk

Right at 3900# one ton xj.
15 psi seems to get the job done on 8 in wheel, no beadlocks.
Crawling/ trail riding, with occasional