Search results for query: *

Hardline Crawlers - Rock Bouncer Builds, Tech & Off-Road Trail Talk

Help Support Hardline Crawlers:

  1. extremetownie

    Jeremy Keen

    Nash is my go to.
  2. extremetownie

    Jeremy Keen

    The compression is fine. It will run as low as 8 to1 , maybe lower. Propane burns slower than gas. That is why it likes timing. Also why you can have much higher compression. Just add some propane till you can smell it. Then back off a little.
  3. extremetownie

    Propane Timing

    You are running lean. Add some propane.
  4. extremetownie

    Toyota Hydro Assist Weird Problem.

    Check to see if the rod on the cylinder is bent. Take it off and you should be able to manually push it in and out. I am guessing it will get real tight when pushing it in.
  5. extremetownie

    Toyota Hydro Assist Weird Problem.

    Does it work ok with the assist ram off?
  6. extremetownie

    Mega buggy/crawler on portals

    Wow . What is the gear ratio?
  7. extremetownie

    Pickett State Park/Blackhouse Mountian 1-23-2016

    Climate change is obviously the reason for those ruts.
  8. extremetownie

    Race Yota 4653

    His Toyota viciously attached my Jeep.
  9. extremetownie

    Tj Spring 35" tire

    I am at 22.5" to the bottom of the skid plate. At least 25 to the frame rail. So I must have a 6+ inch lift. Do you think 2" lift springs would get it down and still be able top run 35" tires?
  10. extremetownie

    Tj Spring 35" tire

    What is your belly height? The questions are for the 4600 jeep. It is too tall, or it feels too tall.
  11. extremetownie

    Tj Spring 35" tire

    What lift springs do I need to clear 35" tires?
  12. extremetownie

    Race Yota 4653

    Good luck.Wish i could go.
  13. extremetownie

    track bar

    Thanks
  14. extremetownie

    track bar

    My drag link goes to my knuckle , attached to the high steer. There is no way i can get the track bar over there.
  15. extremetownie

    track bar

    I am going to run a servo and keep the stock box. I am ready to put the ram on and the track bar is in the way. I guess i will raise it to go over the ram and keep it as long as possible. It is on the race jeep.
  16. extremetownie

    track bar

    It is the parallel 4 link, I think. It is in the way of the ram, Can I move it up and it still work?

Latest posts

Back
Top