Search results for query: *

This is a sweet buggy built with all the goodies. Sent from my SM-J737A using Tapatalk

Re: Re: Brakes Do you know your brake pedal ratio? What stall is your torque converter? To low of a stall tc will push threw just about any brakes. Sent from my XT1585 using Tapatalk

I also have a d60 and a 14b. One ton brakes up front and jb7 3/4 ton in rear. I used wilwood 7 to 1 pedal assy and two 1" master cylinders. With a residual valve on both. Ran plastic brake line all the way to the calipers. I have great brakes! I wouldn't change a thing. The buggy weights 4200#...

Re: Re: Th400 manual valve body questions? Thanks it did take a few calls to get the correct information. I ended up just ordering anew transmission from tci Sent from my XT1585 using Tapatalk

I have called tci and they don't think it's there valve. It turns out the valve is a monster transmission valve. I spoke with them the other day and asked for the installation directions for it. I was told that since I didn't buy it from them they couldn't help me. I am in the process of...

Does anyone recognize this valve body? This was installed by someone else and I don't know who. The transmission was also rebuild then. I am having trouble with reverse. The trans feels like it it is bound up once under a load. It works just fine on flat ground but as soon as you give it a...

Ya really Two tires have one on both inner and outer side wall. Tires probably will never spin fast enough to worry about the balance. Sent from my XT1585 using Tapatalk

Ok great thought maybe I had bought someone else problem. Thanks Sent from my XT1585 using Tapatalk

Re: Re: What kind of repair is this? That's what they are swampers Sent from my XT1585 using Tapatalk

Bought 4 tires a while ago. They were already mounted on rims. Took them off to mount them on new wheels and noticed three of them have what looks like a big hunk of rubber glued to the inside. Not a mark on the outside of the tire to think that there was a injury and they had been repaired. I...

Re: Re: Tube buggy torque converter That be great thank you Sent from my XT1585 using Tapatalk

Looking for a converter for my buggy and undecided on what one. I have a full tube buggy 60/14b 4.11 gears. 4.3 Atlas turbo 400 an a 5.3 ls truck engine. Engine is stock. After talking to a friend about converters he recommended a 3000 stall. He mostly recommend that's cause the stock one would...

Ok thanks That's one of the last things to be mounted on the chassis, and things are getting cramped. Sent from my XT1585 using Tapatalk

First time plumbing full hydro steering. Question if I mount a heat sink style oil cooler slightly above the steering reservoir, will the oil run out of the cooler and over fill the reservoir when the engine is shut off? Sent from my XT1585 using Tapatalk

I have two 18" 2.5 250# and Two 14" 2.5 200# I need two 18" 2.5. 175# and Two 14" 2.5 150# Sent from my XT1585 using Tapatalk

The company I work for has over 80 snow plow trucks. All of our trucks have Allison transmissions. Most of the trucks have a 3000 series trans. In the 17 years I have worked on these trucks we have only had one fail and need rebuilt. They are good transmissions nothing but abuse here at my shop...

Re: Re: Richie Cheatham's Hoorah buggy RAFFLE / or for sale His FB page says that all spots need to be paid by Wednesday at noon or the spot will be sold to someone else. Drawing on Thursday the 14th Sent from my XT1585 using Tapatalk

Re: Re: Two peice 1350 drive shaft . Sent from my XT1585 using Tapatalk

I have been building a tube buggy for a while now and use Hardline for a lot of ideas. I recently was wanting to build a two piece drive shaft because of clearance issues in the buggy. I don't have a lathe, just basic tools. So this is what I came up with. I took a trip down to the new U PULL...

Ok thanks Sent from my XT1585 using Tapatalk