Search results for query: *

1995 Jeep Wrangler SE 2.5L 4-cyl, apx 170k actual miles New aluminum radiator New stainless steel exhaust header and downpipe New starter 5-Speed manual (external slave cylinder) New clutch and slave cylinder 4.56 axle gears Rear chromoly axle shafts New rear driveshaft U-Joints w/ lifetime...

One brand new, never mounted 37x12.5r17 BFG A/T KO2, load range D. Still has shipping labels on it. $200, located in Tri-Cities.

(4) 285-70-17 load range 'C' BFG AT KO2's, less than 300 miles on them. Just removed from a 2018 JLU-R. Located in Tri-Cities area, $800. ***EDIT*** Tires only, wheels not for sale.

Need some basic brake system help. Still working on the same 2009 JKU, and have installed a Mopar Big Brake Kit which consists of a new master cylinder, booster, and front calipers/rotors. I’m battling an extremely soft, and sometimes non-existent, brake pedal. It really acts as if there is...

I'm working on the front brakes for a 2009 Jeep Wrangler, the driver side specifically, and it appears the caliper mount bracket has been contacting the rotor for some time. After disassembling everything and checking it out, the cast mounting ears on the knuckle don't appear to be square to...

*** Pics in CL ad, sorry... *** 2004 Jeep Wrangler Unlimited. This is the extended wheelbase version of the TJ Wrangler, commonly referred to as the LJ. I've spent the last 3 years building this Jeep from bone stock to what it is today. Works perfectly both on and off the road, would not...

*** Sorry for the CL link, thanks to Photobucket I can't link my pictures :mad: *** 1978 Jeep J-10 Honcho pickup project. The Honcho is currently sitting on Chevrolet Blazer 1/2-ton axles, front has locking hubs. Also have complete 1987 Chevrolet drivertrain including 350cid TBI fuel injected...

Chasing a problem on my 2004 LJ that's got the 4.0L/42RLE automatic... About a year ago, after a long loose/rocky climb in the Naches area on a particularly warm summer day, the engine quit while idling at the top of the hill waiting for my wheeling buddy, and it would not restart for about...

Has anyone been on Milk Creek Road up toward the cut-off with NF-590 recently? I've got a few co-workers looking to go camping in that general area next weekend, but they are wanting to take an Class-C RV all the way up there to stay in one of the hunting camps off of NF-590. I seem to recall...

(4) 33x13.5 Swampers for 15" wheels. Three of them still have reasonable tread, the fourth was run with too much air for quite a while and is pretty well run down in the center. I've had them for about 5 years and used them for mock-up and rollers on my flat fender, made one snow run with them...

I'm about to embark on a complete drivetrain swap on a J-series pickup, which will more than likely require several stabs of the engine/transmission to get the mounts laid out and fabricated. I'm installing a bone stock TBI Chevy 350, and I'm curious about using an intake mounted lift plate -...

I am working on an older Warn M8000, and everything seems to function just fine but the ground lug at the battery gets very hot and starts smoking during use. This happens even during no load use, as I do not even have the cable spooled on yet. Can anyone give me ideas of what to look for?

I'm chasing a low power and fuel economy issue on my '04 Wrangler with a 155,xxx mile 4.0L inline six. On hot startup, it will stumble and stutter for several seconds before smoothing out, but overall power is way way down and fuel economy has gone right with it. No CEL and no stored codes...

Have a family member looking for a DD/tow rig, and has found a 2010 Ram 3500 with the 6.7L Cummins and 6-speed. It's a 4wd crew cab short bed single rear wheel truck, but that's about all I know... Anything major to watch out for with this drivetrain/era of Ram trucks?

Can anyone give me some input on the Fortune Creek and/or Van Epps trails near Cle Elum? Never been up in that area, so wondering if these can be run in a comfortable day, or would an overnight stay somewhere to split them up be best? Probably have a small group of capable rigs, with...

Anyone dealt with replacing the blend door actuators on a 2008-2010 Super Duty with the dual zone EATC? I am pretty sure I can get to the upper one that is buried in the dash, behind the air bag and all that, but it's the lower one that has me puzzled... It is mounted from the bottom, and sits...

Here’s the story: 1983 Ford Ranger 2.3L engine, unknown mileage, but the truck was parked ~15 years ago. I pulled the motor last fall to swap into my flat fender, and am finally getting around to test firing the engine before I dive into final wiring/plumbing/etc. I have replaced the plugs...

Is Milk Creek from the bottom of Lily Pond up toward the Funny/Moon Rocks still passable? I've heard that the rains over the past several weeks caused some more washouts and such, but no one can seem to tell me whether or not it's still a viable route? We are planning a small group outing up...

2006 Silverado 1500HD, 6.0L V8, ~65k miles Found a damp spot under the truck over the weekend, looks to be coolant. Crawling all over the topside of the engine, I can't find a damn thing. The bottom side shows minimal signs of a leak from somewhere up front, mostly caught between the ribs of...

Who's running the leveling keys for a GM front end? Can you give some input on likes/dislikes, ride quality, etc?