Search results for query: *

Hey guys, I just finished rebuilding my 83 Toyota front axle. Now when I put the transfer case in 4wd the front axle is very hard to turn. It will even hold the truck on a hill in neutral. If I have it in 2wd with the hubs locked its fine. Here is what I did: I rebuilt the axle following...

Here is the low down: My 22re was slowly losing more power every time I drove. This went on for a few weeks. I only drive it 1 mile at a time so the engine is never really warm. The last time I drove it the power finally went and it just wouldn't move. You can crank the truck and it will fire...

So occasionally when I start up my truck it has been sluggish until I hit the gas and "clear it out" for about 30 seconds. I never noticed smoke before but the other day it did it and a huge cloud of white smoke came out. I now have been paying attention and if I gun it I can get a little bit of...

So I have a 22re in my 4runner with a header and I think 2 1/2" exhaust with a 40 series Flowmaster. In other words it sounds like the rest of the Toyotas on any trail or the ricer Hondas on the street. When I let of the gas it just releases the back pressure in a series of farts. Of course I...

So I read a bunch of different threads and thought I had this figured out. I have an 83 axle and picked up 93 V6 calipers (4 large pistons) and 92 Landcruiser rotors. The rotors don't have the two holes to mount them to the hub. I was looking at the Toyota bible and it says 81 plus LC rotors. So...

So I had my 22re rebuilt last year and put about 3500 miles on it so far. Drove it around Saturday and it ran just fine and then parked it. Got in this morning and turned the key over and it backfired loud and did not start. When I crank it it starts for 1/2 a second then dies right off...

So about 5 weeks ago I took the 4runner on its first wheeling trip. I went up in the snow at Iron Goat trail with the guys from Olympic 4x4. We went at night so I didnt get any pics. The snow wasnt too good then but Chickenwing and I decided to go back up a few weeks ago and the snow was great...

So I have dual cases I just put in my 4runner with 4.7s in the rear. What is the shift pattern? The front case only goes front and back now and has 3 positions and the rear has the usual 4 positions. Whats the combo's I need to know?

So i bought a dual case xmember on craigslist last year and finally got around to putting in my dual cases in my 86 4runner. Once I got it bolted the xfer cases to the plate I noticed the plate holes dont line up with the frame ones. So I am assuming I got the wrong xmember. The guy said it was...

I have been searching for some pics of someone who put a steering stabilizer on a high steer toyota solid axle. My steering is pretty sloppy on the road and want to add one to my setup but cant figure out a good way to mount it. Anyone have some pics?

So I have brought my son out to a few of the crawl comps and he loves to watch them. Now I asked him what he wanted for xmas and he said a RC crawler. He's only 5 so I would like to start him out with just a cheap one. Has anyone messed around with any under $100 ones and think they are decent...

I just had my 22RE rebuilt and got everything together. It starts fine but idles a little low and dies. I tried driving it but you have to give it alot of gas to clear it out or it dies. Then I noticed fuel dripping out the vent of the charcoal canister. I cracked the fuel cap and a ton of air...

Those of you with a Toyota truck or 4runner that came with the Load Sensing Proportioning Valve, what did you do with it after you lifted your truck? Im sure most Toyota guys are going to say "just remove it". If you did that, did you bypass it completely or just leave it in place without the...

So I am setting up some new springs in the back of my 86 4runner. I have some wagoneer 56" springs. How do I know where to put the front mounts? Do I just bolt up the rear shackles and rear springs eyes and lift the front of the springs to the frame and mount them where the shackle is straight...

Has anyone added an after market oil pressure guage to their 22re? I have looked at a bunch of them and they all come with a 1/8" NPT fitting that wont work in the block. I had the auto parts store guy look up the sending unit and it says it is 1/8" ISO/BSP tapered. I havent been able to find...

So I just finished my SAS with rears up front on my 4runner. My front axle is about 4" forward from stock. I am moving the steering box forward now and after reading alot of threads including the links on pirates toyota bible I want to double check my work. With the plates I got I can only move...

Alright I am in the middle of my SAS and have a few questions (I'm sure Chop can help me out). I bought a Sky manufacturing kit. It has a front hanger and the frame tubes with boomerang shackles. They have a nice step by step instructions on their website but its not helping me out much. I am...

Alright instead of doing a garage thread and having all you "know it all's" telling me how I should have done it, I am giving everyone a chance to weigh in before I do the work. Also you guys can point out things I might be overlooking. So I am building a 86 4runner. Lets start with the front...

Does anyone know where I can take some injectors to get cleaned and tested near everett?

So I have been reading alot of people use a wide rear axle (from 4runner?) in their Toyotas? I parted a 83 pickup and plan on using the axles in my 86 4runner I picked up. I measured the axle widths and they seem the same. What is the measurements of the wide axle I should be looking for?