Search results for query: *

My friends Brad and Jennifer Ward are raffling off their HORNET buggy and giving 100% of the proceeds towards the recovery for our good friend's Woody's stepson - Law, who was hurt this summer in a swimming pool accident, where he damaged his spine. Law has just recently started getting feeling...

Listing for a friend - 2009 JK 4 Door Rubicon $25,000 75,000 miles Auto Power windows/doorlocks Hardtop AEV Pintler Wheels AEV Dualsport SC 3.5" lift AEV Snorkel Shrockworks front winch bumper with Warn ZEON winch SpyderOffroad rear winch bumper with Warn M8000 Teraflex rear tire carries HDH...

Just spinning off from all the discussion on AJ's for sale thread... what do you think it costs to build a one off bouncer? I know how much $$ I just spent building mine, and let me tell you... it wasn't cheap! I've had a bunch of jeeps, both built and bought. And I've also had a couple of...

Parts list: Frame/Chassis Design-------- 2014 Spyder OffRoad Design Frame/Chassis Materials----- 1.75" DOM Overall Wheelbase------------- 117 inches Overall Length------------------ Overall Height------------------- SUSPENSION: Front Suspension/Type/Materials---- triangulated 4-Link with...

I've got (2) Trail Worthy Fab 12bolt H1 double beadlocks with: -inner rim stiffener -comp cut PVC -pressed centers -3.5" backspacing -8 on 6.5 They are BRAND NEW IN THE BOX and they aren't painted or powdercoated yet and don't have a rockrings on em - I was going to have Clyde make some for me...

2013 ArcticCat Wildcat X -230ish miles -SOR (SpyderOffRoad) full cage with front and rear bumpers -Wildcat 4 steering/brake kit -corbeau 4 point harnesses -30"dominator tires -superATV High clearance rear radius arms -superATV dom front tie rods -pro armor doors Will consider partial trades on...

I'm kicking around the idea of selling mine: 2013 ArcticCat Wildcat X -230ish miles -SOR (SpyderOffRoad) full cage with front and rear bumpers -Wildcat 4 steering/brake kit -corbeau 4 point harnesses -30"dominator tires -superATV High clearance rear radius arms -superATV dom front tie rods -pro...

I have a Dana 60 front axle sitting at the SOR shop that I was going to put in my buggy, but I've decided to change axles... so this is for sale. - aftermarket SOLID brand Dana 60 center section - reinforced/sleeved axle tubes - Reid Cs - 35 spline Yukon chromoly inner and outer shafts - Yukon...

I've got a BRAND NEW IN THE BOX NorthwestFabWorks NP 205 driver drop (Ford) cable shifter kit with twin stick shift rails that I paid $474.00 + $44 in shipping for. I'm not going to use my NP205 transfercase anymore in my build, so I don't need this either now As a matter of fact, it hasn't...

2005 LQ9 HO 6.0 Drive by Cable Complete with all accessories Computer tuned Harness worked for 5 wire hookup Very clean and in good condition 100k miles I bought the motor from a member on here, and then decided to go a different direction with a completely different motor in the buggy...

WHEELS AND TIRES SOLD AXLES ARE NO LONGER FOR SALE I haven't taken the diff cover off to verify yet, but I was told that it had the following: -5.13 gears -spooled or welded (haven't looked) -yukon outer 35spline shafts -stock 35 spline inner shafts -DOM tie rod -Trussed -4 link tabs already...

I bought this about 6 months ago, and it's been sitting on my garage floor ever since. I was going to put it on my trailer, but I've decided on putting a cheaper winch on it, and not worry with someone stealing this one. Pretty much just want my money back out of it. I bought it from a guy who...

I've got Ethan Tanner's old buggy (Ol' Orange) sitting in my garage and I've decided to sell just the chassis.. TO CLARIFY -- I'm selling ONLY: the chassis, kirkey seats, link bars, (4) 14" fox coilovers with coil springs (the shaft in one is very slightly bent and will need reshafted), Front...

A buddy and I own this True TDD-2 Beer Tap - 2 Keg Kegerator and have decided to sell or trade it. We pretty much only use this Kegerator for our BBQfest team - Slab Yo Mama - during BBQfest in Memphis, TN every May and it has served us VERY WELL the past couple of years. Works perfectly. can...

EOR 321 chassis 120" wheelbase 383 stroker PTC built th400 NP205/NP203 doubler with triple sticks '79 Ford Dana 60 high pinion with Yukon chromoly 35 spline shafts and Yukon super joints 14 bolt rear Detroit locker front Full spool rear Disc brakes all around 42" TSLs on beadlocks - front tires...

I traded my 4-wheeler for a bunch of guns because it was just sitting in my garage taking up space... these are now doing the same, just sitting in my safe taking up space. I already have the guns I want/need for the time being, so I'm selling these -Weatherby vanguard 7mm w/Burris 4.5-14x42...

Does anyone have any experience with the Yukon super joints? I'm doing my homework right now, and trying to figure out what I want. I've heard/read mixed reviews on the Yukon super joints as compared to the CTMs. Also, I'm going to eventually upgrade the shafts in my D60 and I've had RCVs...