anyone have dana 300 dimensions ?

[85b2man]

anyone lol or a 300 i could borrow for mock up

 

[ChrisStewart]

what measurements are you after exactly, just the case it self or what?

 

[BeatCJ]

Copied from Novak: http://www.novak-adapt.com/knowledge/model_300.htm

"The 300 weighs in at 85 lbs. and is about 16" wide. It is factory clocked to 23 degrees down.

The length of the 1980 Dana 300 is ~10-1/2", as measured from the front input face to the rear yoke face. The later version is ~11-5/8" long."

I have a spare in the shed, but I would have to dig it out. Since I'm dealing with a torn rotator cuff on my left shoulder, good chance THAT won't happen. Unless you ask me to...

 

[jeepmauler]

I have a complete 300 with stock input. Has cracked case you could use for mock-up.....I want it back though.

 

[85b2man]

i am after
width from outside of case,
width from imput to front output
how tall it is
and length from front to back :awesomework:

 

[BeatCJ]

i am after
width from outside of case,
width from imput to front output
how tall it is
and length from front to back :awesomework:

At Factory clocking?
Which model, short or long rear output?