AX15 Clutch

lowbudgetjunk · Sep 27, 2016

Anyone have any advice on what to get or what to avoid on a stock AX15?

Been researching until my head hurts. Trail use only with 4500 pounds to lug around. 4.88's in diffs with a Dana 300 transfer case. Sitting on 39.5's with a stock 4.0

Sent from my LGL62VL using Tapatalk

rpf500 · Sep 28, 2016

Got mine at oriellys 2 years ago. Same set up as you but 5:38's. I researched like you and finally got tired of varying opinions and got stock replacement..I'd do it again......

Forbanger · Sep 28, 2016

Ditto on stock replacement! :****:

gottagofast · Sep 28, 2016

X3... I've been beating the snot out if my stock Oriley replacement for 8 years now

lowbudgetjunk · Sep 28, 2016

Re:

Thank you dear lord. I was starting to feel like i was missing the boat on this. I almost went to the parts store and said oem please. Thanks for the honest replies.

Sent from my LGL62VL using Tapatalk

highrange · Sep 28, 2016

Yep stock replacement here too. About the same setup. Still has the same smooth but firm pedal

Hillbilly · Sep 28, 2016

I use TN Clutch by the fairgrounds in Nashville.

tommy450r · Sep 28, 2016

I love my oreillys clutch the throw out bearing is a different story though.. I've had to replace one every year since I installed the parts house clutch..

mac5005 · Sep 29, 2016

I used a centerforce stage 2. Been in the jeep since 04.

It has weights on the pressure plate for extra holding power.

I have a 4.7,ax15, with d300 and wontons and 42s.