No trades, I can ship, and will take money order or wired money don't have paypal. Please call 423 571 0915 rather than pm me or email directly if interested [email protected] I can be a little flexible on price but that is pretty firm becasue I payed sells tax at 9.25% so I have an extra $325 in this setup.
I bought this bender and had ever inntention to build a buggy but got as far as putting the bender together. It has been taken out of the box and put together and cycled without a piece of tubing in it. I am losing my job so it has to go. It has sit in the corner of the garage covered up and not been used since I bought it. I do woodworking and not really a metal guy so I just need to sell. I have the Hydro Model 32 with Electric 1 ½ HP 4000 PSI Hyd Pump, 4-way Valve and Hose and controller, floor pedestal, and one die which is the M32B Die Set - 1.75†(5.5-180) 1 3/4†Round Tube M32R302192
180 degree bend. Minimum Wall Thickness - .095â€. Maximum Wall Thickness â€" .250." The bender is the fastest and one of the most capable benders on the market and the customer service is the best of any company.
I need to sell the bender, pedestal, and pump together and can only seperate the die. They said they would take the die back so I can sell it wit or without the die. The total is 2200 for the Bender, pump, pedestal, and die. I'll take $250 off if you do not want the die. I have a gallon of hydro fluid to go with it.
Below is prices and pics:
http://www.jd2.com/p-38-model-32-bender-hydraulic.aspx $799
http://www.jd2.com/p-37-electric-1-h...-and-hose.aspx $895
http://www.jd2.com/p-41-model-32-floor-pedestal.aspx $135
http://www.jd2.com/p-50-m32-round-die-sets.aspx $300
It is the M32B Die Set - 1.75†(5.5-180) 1 3/4†Round Tube M32R302192
180 degree bend. Minimum Wall Thickness - .095â€. Maximum Wall Thickness â€" .250â€. Price: $300.00
The total is 2200 reduced to 2,000 for the Bender, pump, pedestal, and die. I'll take $250 off if you do not want the die. I have a gallon of hydro fluid to go with it.
Pics:
Link http://s177.photobucket.com/home/car...cpZZ3QQtppZZ20
Video of bender YouTube - ‪JD2 Model 32 Bends 2" .250" wall DOM‬‏
I bought this bender and had ever inntention to build a buggy but got as far as putting the bender together. It has been taken out of the box and put together and cycled without a piece of tubing in it. I am losing my job so it has to go. It has sit in the corner of the garage covered up and not been used since I bought it. I do woodworking and not really a metal guy so I just need to sell. I have the Hydro Model 32 with Electric 1 ½ HP 4000 PSI Hyd Pump, 4-way Valve and Hose and controller, floor pedestal, and one die which is the M32B Die Set - 1.75†(5.5-180) 1 3/4†Round Tube M32R302192
180 degree bend. Minimum Wall Thickness - .095â€. Maximum Wall Thickness â€" .250." The bender is the fastest and one of the most capable benders on the market and the customer service is the best of any company.
I need to sell the bender, pedestal, and pump together and can only seperate the die. They said they would take the die back so I can sell it wit or without the die. The total is 2200 for the Bender, pump, pedestal, and die. I'll take $250 off if you do not want the die. I have a gallon of hydro fluid to go with it.
Below is prices and pics:
http://www.jd2.com/p-38-model-32-bender-hydraulic.aspx $799
http://www.jd2.com/p-37-electric-1-h...-and-hose.aspx $895
http://www.jd2.com/p-41-model-32-floor-pedestal.aspx $135
http://www.jd2.com/p-50-m32-round-die-sets.aspx $300
It is the M32B Die Set - 1.75†(5.5-180) 1 3/4†Round Tube M32R302192
180 degree bend. Minimum Wall Thickness - .095â€. Maximum Wall Thickness â€" .250â€. Price: $300.00
The total is 2200 reduced to 2,000 for the Bender, pump, pedestal, and die. I'll take $250 off if you do not want the die. I have a gallon of hydro fluid to go with it.
Pics:
Link http://s177.photobucket.com/home/car...cpZZ3QQtppZZ20
Video of bender YouTube - ‪JD2 Model 32 Bends 2" .250" wall DOM‬‏