Bronco 2.5 Full tuber

stompinjab1 · Feb 27, 2007

This is a 72 Bronco

Chass is full tube 3 seater
Motor SB 350 TPI or TBI we have both
Trans TH 350
T case Klune to a 205
Front diff 2 1/2 ton steer, spooled, pinion brake,full hydro 4 link, 16" Sway away coil overs
Rear diff 2 1/2 ton steer, spooled, pinion brake,full hydro, 4 link, 16" Sway away coil overs
Tires 44" TSLs or 47" LTBs

This is the doner at the start
And how it looks now

Specs
107"to 109"
belly pan 24" from the ground
WMS 69 1/2
77" to 79" to top of cage

KarlVP · Feb 27, 2007

Sweet.....

stompinjab1 · Mar 5, 2007

Ok finally got some more tube on it. Guess I better hurry if it's goin to be drivin May 1st

stompinjab1 · Mar 5, 2007

And one more from the back with the dove

MIG'DHORSE · Mar 5, 2007

damnnnnnn!

stompinjab1 · Apr 24, 2007

Ok due to some shop issues we just got back to work. In that time the TPI motor we had was a crusty 5.0.So now we just got the brand new balanced, blue printed,aluminum headed, full roller LT1 with plug and play harness. New TH350 , still the Klune 4.0 to NP205. And all specs are out the door due to the 54" boggers that we should see in 3 to 4 weeks Thanks to Super Swamper for the hook up:awesomework:

London Gentleman · Apr 24, 2007

Wow! You're going to run 54's!!!!!!!!! That is rediculous! More pics please!!!
Cory,

jeffs88toy · Apr 24, 2007

nice to see chevy in a ford .:awesomework:

Bunk1 · Apr 24, 2007

Ya gonna keep the axles full width or narrow em?

Poohbair · Apr 24, 2007

cool build with the exception of the engine/tranny combo...:booo:

stompinjab1 · Apr 25, 2007

Bunk said:
Ya gonna keep the axles full width or narrow em?

We are flipin the hubs to get a WMS of 69.5' but not cutting the tubes

pbmcauliffe · Apr 25, 2007

stompinjab1 said:
We are flipin the hubs to get a WMS of 69.5' but not cutting the tubes

Wow that will be wide sumbitch, or do you mean 69.5"
ha ha

stompinjab1 · May 4, 2007

So we got some tube put on it today here are some pics

Not Jobless · May 4, 2007

A GM motor & tranny in a classic EB...:rb:

Who's brain surgeon idea was that?

The rest is looking cool though :beer:

stompinjab1 · May 4, 2007

Your rite it sounds more like a
J ust
E veryone
E lses
P arts

TMFabrication · May 4, 2007

Poohbair said:
cool build with the exception of the engine/tranny combo...:booo:

x2, killer rig, huge tires, axles, tube chassis, EB body.........................350/TH350, needs a big block or stroked small block and a stout tranny.

pbmcauliffe · May 4, 2007

looks a lot better than the first idea.

London Gentleman · May 4, 2007

I say go with a big block to turn them tires! Cool looking pics!!!
Cory,

stompinjab1 · May 6, 2007

Ok friday we got some more tube on and the stock floor removed And today we got the motor, trans and cases set in and mounts started here are some pics