I have purchased a late 60's early 70's chevy dana 60 rear axle. I have yet to pick it up so I don't know if its full or semi float, what ratio, locker, axle spline count. But I am going to be redoing everything in this axle. My question is if someone can help me and give me a list of everything I will need to rebuild this axle to build it to my specs. 35 spline full floater, detroit, 5.13's, disc brakes. I know I will need 35 spline full float shafts, disc brake brackets with rotors and calipers, but my question is how do the axle bolt into the housing? If its full floater? Am I getting D60 spindles, and hubs with lug studs in them? Then slide the spindle on the axle, then bolt the caliper bracket on the hub then install the shaft and lockouts, and then the rotor slides right on to the hub or what? I am very confused at this point so any pics would be a very big help. I have tried google searches for D60 rebuild tech articles and no luck finding any with in depth disc brakes full floater. sorry for the long essay please help me!