Domestic Violence III

[fj401ton]

sweet build james, will be looking forward to the progress and details of your new car :corn:.

i am pretty sure that i will be building a new one soon as well :;

cheers tom

 

[TDW]

He got a lot done this weekend, although this part never looks like much. Got all of link mounting points placed and tacked. From here it'll really start looking like a car fast.

The trans adapter was flipped and mounted from above.

 

[TDW]

Front upper link mounts placed on the housing.

He machined and welded spacers to the link tabs to act as misalignments.

Passenger upper link to motor mount clearance.

Frame mount end of the links.

 

[TDW]

Rear axle link mounts placed.

Frame mounts tacked in place.

Another.

And another.

 

[TDW]

Approximate location of the seats.

 

[TDW]

Trans cooler.

Knocked the shine off the wheels.

 

[Cascade_Crawler]

why does he have the rear diff offset?

 

[johny5]

I'm liking the tcase mount.

 

[jimboy]

why does he have the rear diff offset?

To get the diff closer to the tire. The driveline angle is still pretty good. we will see if it makes a difference:stirpot:.

 

[dirtygoat]

Very cool, I love watching these rigs go together...


BTW, is the lower rear drivers link bent???

 

[NotSoPC]

Very cool, I love watching these rigs go together...


BTW, is the lower rear drivers link bent???

Looks bent to me.:eeek: It does have a **** ton of rock rash

 

[CHOP SHOP]

Whats the tcase adapter out of or if custom what brand?

 

[TDW]

Very cool, I love watching these rigs go together...


BTW, is the lower rear drivers link bent???

The links are all old used parts used for mock up. When complete it will have heat treated Spidertrax links.

 

[TDW]

Whats the tcase adapter out of or if custom what brand?

It's a modified Advance Adapters unit. Just their standard TH350 to Atlas adapter.

 

[johny5]

Is there going to be a t case support ,off the tcase mount?

I just had re place my tranny case because of a cracked tail stock. my tcase was un supported

 

[Clark]

it's gonna be sick. Nice work as usual.:beer:

 

[Binder]

I know that Binders is leaning back kind of like this too.. Just asking cause I am unsure. :awesomework:

i fought heating problems with a angled radiator and it was no where close to that.

I had cooling issues for a long time too. Mounted a Taurus fan and never had another problem. My radiator is about the same angle as the one in the picture, maybe a bit flatter.....hijack off.

 

[jimboy]

Is there going to be a t case support ,off the tcase mount?

I just had re place my tranny case because of a cracked tail stock. my tcase was un supported

My tcase is an atlas 2, there no need to support it at the tail shaft.

 

[3casedtoy]

lookin bad ass as always James, can't wait to see it

 

[Bunk1]

heat treated Spidertrax links.

$$$$$:stirpot: