The Dirty Girl was built by Hadley Spencer and Jason Washburn from northern Virginia for Hadley. Hadley had a built Jeep that couldn't take the abuse, but he loved trail riding and didn't want to give up much comfort and storage with a buggy, but yet still had cool "rock bouncer" style lines. They came up with this trail bouncer chassis to try to get the best of both worlds.
Pacific Fabrication 6.0 pushing around 400 horse, fully built TH400 with red Kevlar clutches, monster-in-a-box kit, reverse manual valvebody, the works. Mounted to a 3:1 atlas with 1410 outputs. The driveshafts are bulletproof 1/4" wall and fully tig welded. The axles are custom built 14 bolts front and rear with Artec trusses and a custom "backbone" on the rear axle. The custom four-link suspension uses FOA shocks and Wide Open Design lower 7075 links and chromo uppers with 1.25" rod ends all around. 17" Allied beadlocks on non sticky 43" SXs.
See full feature gallery here:
http://www.rickybphotography.com/Rig-Features/White-Trash-Fab-Dirty-Girl/
Also check out the build thread:
http://www.pirate4x4.com/forum/general-4x4-discussion/1460257-white-trash-racing-bouncer-build-dirty-girl.html
Pacific Fabrication 6.0 pushing around 400 horse, fully built TH400 with red Kevlar clutches, monster-in-a-box kit, reverse manual valvebody, the works. Mounted to a 3:1 atlas with 1410 outputs. The driveshafts are bulletproof 1/4" wall and fully tig welded. The axles are custom built 14 bolts front and rear with Artec trusses and a custom "backbone" on the rear axle. The custom four-link suspension uses FOA shocks and Wide Open Design lower 7075 links and chromo uppers with 1.25" rod ends all around. 17" Allied beadlocks on non sticky 43" SXs.
See full feature gallery here:
http://www.rickybphotography.com/Rig-Features/White-Trash-Fab-Dirty-Girl/
Also check out the build thread:
http://www.pirate4x4.com/forum/general-4x4-discussion/1460257-white-trash-racing-bouncer-build-dirty-girl.html
