kmcminn
Well-Known Member
The aggravation will be worth it in the end. Now just putting up with our ****ty spotting.
French Tickler buggy
- Thread starter Bebop
- Start date
Jduck
Well-Known Member
Bebop said:
kmcminn
Well-Known Member
Bebop said:Thanks buddy. Can't wait
Even with ****ty spotting, no way I'll flip it faster than you did tho.
You probably wont drive like me either.
P
If its free, its P
Bebop said:
Stay at it so we can find out bud !
You can get it done, it seems like you hot a wall but you just gotta breakdown system to system and focus on 1 piece of the puzzle at a time until you've seen it through. It'll be worth it !
That's what I'll do.
And because I can't do anything normal, I'm now an expert on Parker flare-less hydraulic fittings. The goal is to use hard line instead of regular lines. This is needed because I can't fit hoses in the room I have dedicated for it.
And because I can't do anything normal, I'm now an expert on Parker flare-less hydraulic fittings. The goal is to use hard line instead of regular lines. This is needed because I can't fit hoses in the room I have dedicated for it.
onetoncrawler
Well-Known Member
when do you think will be the first outing?
onepieceatatime
I like turtles...
Bebop said:
quit fawking off and get it to Harlan in October
1 month of break on the crawler.
Went back to France and enjoyed some family time.
Dropped head on daily as soon as I came back.
So I'm back to it.
Pulled out and cleaned the front housing.
Set up pinion preload at 34 in-lbs.
Got stopped right in my tracks when I realized I didn't have the right ring gear bolts... Big thanks to Wizzo for being very reactive and getting the good stuff sent from Mark Williams in a hurry. Should finish this diff install this weekend 8)
Built front mid shaft (.010 of run out..., IDK if I should **** with it more or leave it there in fear of making it worse)
Plumbed the trans cooler.
I also went to visit a big shop. Might be moving in the near future.
Went back to France and enjoyed some family time.
Dropped head on daily as soon as I came back.
So I'm back to it.
Pulled out and cleaned the front housing.
Set up pinion preload at 34 in-lbs.
Got stopped right in my tracks when I realized I didn't have the right ring gear bolts... Big thanks to Wizzo for being very reactive and getting the good stuff sent from Mark Williams in a hurry. Should finish this diff install this weekend 8)
Built front mid shaft (.010 of run out..., IDK if I should **** with it more or leave it there in fear of making it worse)
Plumbed the trans cooler.
I also went to visit a big shop. Might be moving in the near future.
wizzo
Well-Known Member
Bebop said:
Glad we could help!
French tickler first time out.
At 10PM yesterday, she rolled out on her own.
Still some work left, but I see the end of the tunnel.
8h+ days in the garage this week to get there.
At 10PM yesterday, she rolled out on her own.
Still some work left, but I see the end of the tunnel.
8h+ days in the garage this week to get there.
Bebop said:
Oui Oui, Magnifico Frenchy...
ADMINISTRATOR
Beerj
Sonzabitches!
C'mon man, 1 more month!
ridered3
Not Rigless
Looks like second shift deserves a raise...
I'm very excited !
Hopefully I get the shafts on time for Harlan in October. Cause I know the rest is gonna be ready.
Still have to bleed the brakes better, pedal felt like ****, but that was enough for a test.
Steering is surprisingly good despite the crazy plumbing I had to do for the hydroboost. I'll make sure to detail that part when I'm sure it works as I'd like.
Otherwise it's getting fancy wilwood ****, but if I can avoid that I'd love to.
All shifts deserve a raise IMO ;D
Hopefully I get the shafts on time for Harlan in October. Cause I know the rest is gonna be ready.
Still have to bleed the brakes better, pedal felt like ****, but that was enough for a test.
Steering is surprisingly good despite the crazy plumbing I had to do for the hydroboost. I'll make sure to detail that part when I'm sure it works as I'd like.
Otherwise it's getting fancy wilwood ****, but if I can avoid that I'd love to.
All shifts deserve a raise IMO ;D
doubleud
Well-Known Member
Glad to see this thing moving! Thats a big motivator to get everything buttoned up and get to wheeling.
