KarlVP
Love that TOYOTA
So I did the head gaskets on my 03 duramax (non cali emissions) and I'm having trouble with the glow plug controller wiring.
I have the FSM and it isn't really helping me any. The pictures are vague and the instructions say "attach wires to glow plug controller".
I know where the "weather seal" 4 wire connector goes, and that leaves me with 4 wires and 3 posts on the glow plug controller and I don't know where to put them.
I have one wire that runs from the glow plug controller to the driver side glow plug bus bar on the rear and then there is a wire the runs from the passenger side bus bar to the front of the bus bar on the drivers side.
I have one wire that runs from the glow plug controller to the intake heater. Both of these have the rubber boots on them at the glow plug controller.
I then have 2 identical pink wires at the glow plug controller that have blue wire shield on them. I haven't traced them out.
My question is where to these wires go on the glow plug controller? 4 Wires, three posts on the controller and I'm stumped.
I have the FSM and it isn't really helping me any. The pictures are vague and the instructions say "attach wires to glow plug controller".
I know where the "weather seal" 4 wire connector goes, and that leaves me with 4 wires and 3 posts on the glow plug controller and I don't know where to put them.
I have one wire that runs from the glow plug controller to the driver side glow plug bus bar on the rear and then there is a wire the runs from the passenger side bus bar to the front of the bus bar on the drivers side.
I have one wire that runs from the glow plug controller to the intake heater. Both of these have the rubber boots on them at the glow plug controller.
I then have 2 identical pink wires at the glow plug controller that have blue wire shield on them. I haven't traced them out.
My question is where to these wires go on the glow plug controller? 4 Wires, three posts on the controller and I'm stumped.