zukkev
Cornfuzzled yet again...
You can check codes in this by jumping terminals A and B in the aldl with a paper clip...then just count the flashes of the CEL...
-
Help Support Hardline Crawlers :
lumina w/ 3.1 runs like crap when it is warm out
- Thread starter PHILLBILLY1
- Start date
PHILLBILLY1
Well-Known Member
Sorry for the crappy pics, but it is dark out:redneck:
PHILLBILLY1
Well-Known Member
I will tomorrow when it is lighter out.:awesomework:
yeah, this thing is crammed in there. I am going to have to hire someone with VERY skinny arms to work on this.
zukkev
Cornfuzzled yet again...
TBI's don't have near the intake gasket issues that the 3100/3400's/even the 3800's do....but worth a look just the same...
PHILLBILLY1
Well-Known Member
The exhaust isn't unusual(smell or smoke) and it doesnt have a vacuum leak anywhere, but if all I gotta do is look at the intake to see if there is a puddle forming, no problem.
The only time the exhaust changes, is when it starts giving me issues. Even then, it only stinks. No smoke or steam.
Just another bit of info that may help in diagnosing or troubleshooting
OH! Sometimes it runs as though it has a miss too(maybe one cylinder). That is not all the time, but it is a somewhat common occurance.:awesomework:
Not sure how I forgot to add that to the original post???:scratchhead:^^^^^
The only time the exhaust changes, is when it starts giving me issues. Even then, it only stinks. No smoke or steam.
Just another bit of info that may help in diagnosing or troubleshooting
OH! Sometimes it runs as though it has a miss too(maybe one cylinder). That is not all the time, but it is a somewhat common occurance.:awesomework:
Not sure how I forgot to add that to the original post???:scratchhead:^^^^^
Last edited:
zukkev
Cornfuzzled yet again...
Get a scanner that will allow you to look at datastream...'see' what's going on...
Similar threads
