need advice

[blaz4x4]

Building a 1980 to with tbi 350. Cannot find a radiator that will fit. I have one that is 2 inches to tall and I was told by some race guys there is a guy in monroe that can alter aluminum radiators to fit racecars but I cannot find him. Does anyone know how to get in touch with this guy or have any other options for me. The measurements are 27 in wide and at most 17 in tall. Thanks.

 

[jeepmauler]

http://store.summitracing.com/partdetail.asp?autofilter=1&part=SUM%2D380645&N=700+115&autoview=sku

That took 'bout 2 minutes...........

 

[JayH]

Too bad it's still gonna be an inch too tall.

 

[blaz4x4]

I had allready found that one. It is only a one core was afraid it would not keep it cool enough.

 

[Glenn]

Too bad it's still gonna be an inch too tall.

The one in the link is 16" tall, and he was wanting at most 17" tall.

 

[PORTER]

I have bought many conversion radiators from 1-800-radiator. Give them a call. The last one i bought was for a 91 wrangler with a TBI 350, only cost me 186 to my door and kept the rig cool. Good luck.

 

[smalltowncowboy]

are you looking for strictly an aluminum one or ? i built a 85 blazer with a tbi 350 and just took a 3 core from an 87 pickup no problem fitting it.