Im installing a TC style pump on my Toyota along with a bigger reservoir and plate style cooler. Went to route the hoses to the front of the radiator for the cooler and happened to look at PSC's website ( the diagram is for full hydro, but I will have assist) . Am I wrong or is something not right? I thought on a radiator it was hot in the top and cooler out the bottom, but that is not what they have shown. I was planning on routing from the low pressure side of the steering box to the high side of the cooler and the low side of the cooler returning to the reservoir. This is what I'm working with. The Cooler is not mounted yet, and the hoses have plenty of extra to cut down. Thanks :beer:
Attachments
Last edited:
