jeepin_coug
Member
Who re-centers rims around here, and any idea how much it would be? I have a set of beadlocks I need to change.
how about re-centering hummer b.locks, I'll need some for my 60 project...Dude said:what do you actually need?? I am confused, recentering the center peice?? :wtf:
I have done rims from raw peices and there easy, any offset you want. :;
those are easy to do, were ya at??XJOE said:how about re-centering hummer b.locks, I'll need some for my 60 project...
Port orchard. Just starting to gather parts, so it will be a little while. I have a source or two on line, but I always try to do stuff locally if possible.Dude said:those are easy to do, were ya at??
I would have to do it in Everette, don't worry, I'm a professional.
well let me know, it won't be cheap, but not an arm and a leg either. :;XJOE said:Port orchard. Just starting to gather parts, so it will be a little while. I have a source or two on line, but I always try to do stuff locally if possible.
Dude said:what do you actually need?? I am confused, recentering the center peice?? :wtf:
I have done rims from raw peices and there easy, any offset you want. :;
5x4.5 to 6 bolt? or 5x5.5? or ?jeepin_coug said:I just need the center piece changed to a different bolt pattern. I'm installing a hp44 in place of the dana 30 and need a new bolt pattern. I just built the beadlocks this winter, so I'm hoping to keep them, and just change the pattern.
Dude said:5x4.5 to 6 bolt? or 5x5.5? or ?
So you need a new center welded in? or a redrill?, if you can redrill the rims then find somebody with a mill and a rotary table fixture, Trail Ready might be your best bet.
If you can find a rim that has the center you need and it is a steel rim then I could change out the centers. It would be a full day job and it wouldn't be cheap. I am at a regular welding shop rate at $75 an hour, anybody cheaper doesn't put out the real nice work or works for free.
I can have all new centers Lazar cut. but it would be a flat faced solid center made of 1/4" CR. Holes would be optional and of course cost extra.jeepin_coug said:I'm going from 5x4.5 to 6 lug so I would need whole new centers. I couldn't just redrill mine.
Dude said:I can have all new centers Lazar cut. but it would be a flat faced solid center made of 1/4" CR. Holes would be optional and of course cost extra.
personally, I would sell the ones you have and start over. Your going to be into these wheels way over what you should be, your choice man. :;
jeepin_coug said:I think I'm going to talk to Stockton Wheels and see if I can get new centers, make a jig and weld them in myself.