Rockwell steering double ended ram

[Tyler Diesel]

OK I am running front and rear steer rocks on my buggy build I have got bomb proof knuckles from plan b fab and I am using a surplus 2.5x10 double ended ram I had plan b leave the steering arms off my knuckles so I could build my own to work with my four link since I only have 8 inches of separation on my links and I am going to b running my ram on the inside of axle. My question is do most of tall use clevis on the ram and 3/4 heims or are tall using 1 1/4 heims turned down I'm not building this to beat like a tanner or Cameron but I don't want it to fail. I don't get much free time so I'd like to build it ounce and it last

 

[TBItoy]

Some 7/8x3/4 should be plenty strong for your steering. 7/8 shank 3/4 hole.