-
Help Support Hardline Crawlers :
"The mistress"
- Thread starter rockmike
- Start date
orangecrush1
Well-Known Member
you got that thing done yet ? what,s the hold up.
At the rate im going completion date should be around 2015 lol.
My malfunction is some crazy bastard(me)tried fallowing a group of hotrod rigs sporting 42"tires through a nasty canyon with 32" tires.And proceded to fawk the lil rig all up!!!! That crazy bastard had alot of fun!!!doing it though.
The sj is all fixed ,finished up now,so Ill get back to this pile soon.:redneck:
To prove I havnt been just sitting on my ass drinkin beer :fawkdancesmiley:
Last edited:
rangerboyhoff
Well-Known Member
looks good man! what did you use for the c02 rings?
dove'd85
Well-Known Member
lookin good:beer: nice track bar mount
go back and take a better look at the pics:fawkdancesmiley:
go back and take a better look at the pics:fawkdancesmiley:
LIKES2CRAWL
Active Member
- Joined
- Aug 1, 2006
- Messages
- 41
*UPDATES* :fawkdancesmiley: *UPDATES* :fawkdancesmiley: *UPDATES*
I got the upper link chassis mount designed and built just need to weld her together.I put lots of adjustment into this piece,Ive read thats a good idea to be able to dial in youre suspension.
It needed to be mounts away from the fram so I put in a 1" spacer and milled in a pocket so you can get at the nuts for the link mount bolts.I chamfered off all the to be welded edges for some nice penetration.:awesomework:
Some more fish plating to tie in the lower link mount and reinforcement for the upper link mount.
:beer::beer:
It needed to be mounts away from the fram so I put in a 1" spacer and milled in a pocket so you can get at the nuts for the link mount bolts.I chamfered off all the to be welded edges for some nice penetration.:awesomework:
Some more fish plating to tie in the lower link mount and reinforcement for the upper link mount.
Last edited:
Got a bunch more stuff figured out and built
I got the axle upper link built and tacked in,there still a tab or 2 to build for it.
Here it is links all done up just need a panhard figured out and built.
heres some nice pics of the detail on the chassis's upper link mount.
threw some gussets in there for extra strength.
:redneck:
I got the axle upper link built and tacked in,there still a tab or 2 to build for it.
Here it is links all done up just need a panhard figured out and built.
heres some nice pics of the detail on the chassis's upper link mount.
threw some gussets in there for extra strength.
Last edited:
pan hard mount
Next was to build a axle panhard mount.
Mocking it up checking fit and stuff.
The front side.
At this point im liken what I see.So time to lighten it up and make her look cool!!!
I through a tab in here for some reiforcement and another couple pieces to come.
Front piece "speed holed" out,some tabs Ill put together soon.
brb
Next was to build a axle panhard mount.
Mocking it up checking fit and stuff.
The front side.
At this point im liken what I see.So time to lighten it up and make her look cool!!!
I through a tab in here for some reiforcement and another couple pieces to come.
Front piece "speed holed" out,some tabs Ill put together soon.
brb
Heres the front view of the piece tacked in for final fit.
Heres those lil tabs I built put to use,I wanted to give some support on the back side of this mount to make it real strong.Ive gottin real tired of making holes at this point lol,but worth the effort I think.
A couple differant views for ya.
I gots to start getting ready for memorial weekend so this will have to waite till I get back from wheelin to build the frame mount for the pan hard.
:redneck:
Heres those lil tabs I built put to use,I wanted to give some support on the back side of this mount to make it real strong.Ive gottin real tired of making holes at this point lol,but worth the effort I think.
A couple differant views for ya.
I gots to start getting ready for memorial weekend so this will have to waite till I get back from wheelin to build the frame mount for the pan hard.
:redneck:
bobbed_84_toy
ALWAY$ BROKE
*updates*
Been awhile since I posted in this thread,I have got some work done.Getting close to finishing up this front end.
The frame mount for the pan hard bar.
Then I built a fancy coilover mount.
Some bracing for that mount.
bracing tacked in.
more to come.:beer:
Been awhile since I posted in this thread,I have got some work done.Getting close to finishing up this front end.
The frame mount for the pan hard bar.
Then I built a fancy coilover mount.
Some bracing for that mount.
bracing tacked in.
more to come.:beer:
dove'd85
Well-Known Member
mad skillz
Thanks man,I appreciate it.This thing is taking forever but im trying to cover all the lil details and make stuff nice.
Im surprised none else has anything to say,maYbe its just to much overkill for some taste.i like over kill.lol:awesomework:
Im surprised none else has anything to say,maYbe its just to much overkill for some taste.i like over kill.lol:awesomework:
Some more progress.
I went and bought a cutting torch so I could do some bending and fitting for this other mount.
Built the the other coilover mount.
machined ready for some weld
welded
Nice
pics of the mount for the driverside.
Knuckle gusset I built aND TACKED IN.
I went and bought a cutting torch so I could do some bending and fitting for this other mount.
Built the the other coilover mount.
machined ready for some weld
welded
Nice
pics of the mount for the driverside.
Knuckle gusset I built aND TACKED IN.
:awesomework: Yeah, no ****. It's hard to type when your keyboard is covered in drool. :haha: Simply amazing work. By all means, keep taking your time, this thing is turning out sweet.
X2:awesomework:
Similar threads
