Tj-6

[PHILLBILLY1]

That is badass! I am a huge fan of that!:awesomework:
I wanted to get a cj6 and put cj7 door openings in it for that same kinda look. Awesome fab work. Not too many people have that kind of skill. Looks nice:awesomework:
Can't wait to see the finshed product:corn:

 

[MCE Jason]

Some fun in the snow

 

[MCE Jason]

Shots from Moab. Sorry it took me so long to post, I have been really really busy with the fenders.

 

[MCE Jason]

 

[MCE Jason]

Started up the cage upgrades. Used some PSC parts and 1.75x.120 DOM. It is all just tacked in at this point. I still have to beef up the rear before pulling and painting the cage. I do not have a bender or notcher but I am happy so far.

 

[MCE Jason]

http://www.facebook.com/l.php?u=http://www.youtube.com/watch?v=Cd_3u_SePfc&h=30824

http://www.youtube.com/watch?v=Cd_3u_SePfc

moab this year, tj-6 still solid had to take some bad (more fun) lines to test the prototype MCE fenders. they also did great that is the 6" in video

 

[MCE Jason]

Sanden grease mod-
http://www.grungle.com/endlessair.html

OBA-

intake

 

[MCE Jason]

 

[MCE Jason]

http://www.youtube.com/watch?feature=player_profilepage&v=1Xm75tWjhbU

The pinch weld was pulling apart from being flexed by the tire carrier pushing in as the tire would hit the ground on hill climes. I welded up the seam at the edge of the tail gate and then made a bracket to tie the PSC corner into the wheel well after the pinch welds. I will be making a new tire carrier very soon. I buttered (like laying tile) the brackets with seam sealer to help prevent corrosion.

 

[MCE Jason]

Mock up tire location.

Used all the old parts off the old.

Built a landing pad for the wheel. I can now set the wheel on it, and then spin it until the studs line up.

Still need to add CB antenna mount, back up lights, and some gussets, but for now it will come off and I will work on paint prep.

 

[MCE Jason]

added a back up p.o.c. for the OBA

 

[MCE Jason]

Backup light

Hunting box

 

[pokey]

Nice build thread :cheer: Thanks for sharing :awesomework:

 

[slednecks1124]

Very cool build, I love seeing things done that are out of the ordinary. How is the ride and stability compared to before?

 

[MCE Jason]

Thanks, this seems like a cool local group of wheelers over here. I have been building the jeep up for about 1