Ten4
Well-Known Member
lookin for some help here. i have an 87 toyota 4x4. i have done a sas and all the other typical toyota stuff. now i am going to swap in a 5-speed. already have the tranny. just curious if anyone on here has does this. i have a few questions.
1. what is that computer/module in front of the auto-shifter?
2. how hard is it to cut the hole in the fire wall for the clutch master cylinder? any pointers on how to?
3.and what all do i need to get from a donor vehicle for the pedals?
4. do i just un-bolt the auto brake pedal and bolt on the manual pedals?
any input would be much appreciated.:awesomework: i hope to be doin this soon.
1. what is that computer/module in front of the auto-shifter?
2. how hard is it to cut the hole in the fire wall for the clutch master cylinder? any pointers on how to?
3.and what all do i need to get from a donor vehicle for the pedals?
4. do i just un-bolt the auto brake pedal and bolt on the manual pedals?
any input would be much appreciated.:awesomework: i hope to be doin this soon.