Recent content by LSO

"If you cant say anything nice dont say anything at all" Didnt your mother teach you that :flipoff:

Ok guys i finally got the money to get a new head and cam for my 22RE, after cracking it at the best in the west. So im really picky about cleaning when i put motor back together so i cleaned out all the head bolt hole really good. But one of the little bastards striped on the first of the 3...

Thanks guys i already did the break cleaner cheak. What in really interested in is if people are useing the engine builder kits? Thanks for all the input guys.

Right on thanks for the info. Have you guys used the engine builders gasket kits? are the head gaskets up to snuff? read mixed reviews.

Wire wheel the sealing surface? That seams risky. I was going to use a lapping tool and grinding compound and clean the seats that way and then cheak for leaks again.

Right on. so you use it on both piston and valves? Brass one or is steel ok?

So im in the middle of a over haul on my 22re head. My valves are caked with some nasty stuff im looking for a safe way to clean them up. I know not to work on the seating surface. But what kind of abrasive would be safe to get the crap (mud) off. Also got a bit of build up on some of the piston...

Well I didn't know it wasn't core. My bad

Just wanted to says had a great time and a big thanks to the CORE guys for giving us some big rocks in area to play on :awesomework:

I should make it out to play :awesomework:

So I will let Tmill tell you about the new plan but you can kind get the idea buy the work we did this weekend :redneck: Good buy cab :flipoff: The new drive train And man does it suck cutting apart your own work :booo:

Had a great time on new years eve! i finally figured out how to not let the buggy bottom out on pot hole! go faster and stay in the throttle and the front end lifts and floats throw it all :awesomework:

I hope there is one! i got this new buggy and i want to see what its got:D

Ya forgot to mention that:D

The 90's FJ 80 rears might work for you and if you wanted to link it up the upper axle stock mounts on those have a money angle! pic with gusseted stock uppers :awesomework: