Land crusher built

Nice lookin rig man, you guys are doing a damn good job.

This thing must not ever see the street cause ive never seen it around graham. keep up the good work :awesomework:

zip said:

Pumpy, we met up at Reiter on the 1st, nice bronco by the way. I was wondering what the wheelbase & width dimensions of the two rigs were? Nice work :awesomework:

Click to expand...

Which two rigs? I"m assuming my bronco and the land crusher on this thread.
Well the bronco is 108" wheel base and 88" of pooch and the land crusher is for now 104" and 90" of pooch, it's going to 108"ish soon, and 88" of pooch.
and ZIP what were you driving??? and your not confusing me with pumpy jr. right. which would be a compliment, but he all so has a bronco. but I was at Reiter so you must be talking to me, and Ironically the owner of the LAND CRUSHER was riding with me.:awesomework: am I still talking??? bla bub bla bla bla.

slednecks1124 said:

Nice look in rig man, you guys are doing a damn good job.

This thing must not ever see the street cause Ive never seen it around graham. keep up the good work :awesomework:

Click to expand...

It sees the street on the back of a 24' deck over trailer:awesomework:

Yes two in the pic (bronco/toy) thanks for info

I was in the green CJ7 on 38's, we were sitting out on the powerlines when you guys stopped for a few minutes of BS'

Oh cool I was having a blast just mobbing around. and why is it that every time I stop to bull **** every one is ready to roll?? maybe because I keep driving around F'in off and park at the last minute, but I remember your rig cool jeep man:awesomework:

How about some updates?

looks really good man

more pic's

here's one of the dash wired up and installed, as you can see the ARB compressor is dangling and ready next. the switch panel has to come back out for a few relays to get wired in and clean up the new harness with some routing and ziptyes, but more detailed pic's coming soon, this pic was from Jason's phone, my camera is in Darby's slowburban:booo:
View attachment 26328

Ok..Gotta be something new now...

OK bunk here are some pic's, like I said Darby has my camera so these pic are from J's camera "that I stole for this posting" but It's his rig any way so who cares

Here's one of the new door bar and as you can see the seat's are in. And what do you think of the pink on silver cool huh.......no? well it was funny for a minute
View attachment 26469

here's one of J couping the end of a tube with "blink a lot" safety glasses
View attachment 26470

and here's passenger side door bar with more tube to come:awesomework:
View attachment 26471

The first rear bar, this whole setup in the rear from this bar up will stay but from this bar down will be short lived, to make way for the new 4 link and coil-over's in the next year.
View attachment 26472

and here's Pickle working with some tranny shizz also. It's fun having most of your bud's in one shop working on the cool **** and hammering out the real world issue's at hand:awesomework:
View attachment 26473

Looking good Jason. So, when is my rig due for a cage and 4link..?

BTW if Gowin looses an eye it would be almost perfect. He could hear for ya and you could see for him. J/K keep up the good work. Can't wait to see ya up at Reiter again. This time i'll bring proper protection ( paintball gun and full raingear) :haha:

you guys have been busy since I left..looks good!!! :awesomework:


But what is with the poor lighting in the shop??

Hey thats' funny at first I was like who the faulk is that then I was like ya only my old neighbor would say that, and then It hit me, you are my old neighbor.:fawkdancesmiley: so how's your project heep coming in Arizona???

going to hit up the local wrecking yards tomorrow see what clean dry not rusty parts look like :flipoff: Havent done much, still to far from the toolbox. I start it once in awhile to annoy the neighbors :haha:

I like how the floor pan/tunnel turned out.......

crash said:

I like how the floor pan/tunnel turned out.......

Click to expand...

Thanks, Jason's kinda taking a week off from it due to having his kids this week and taking them to monster truck's this weekend but were planning a major work party on Monday, should be more pic's Mon. night:awesomework:

That is some nice work you guys are doin. I am turned on by that floor you put in that thing :masturbanana[1]: :awesomework:

Jay Luke said:

That is some nice work you guys are doin. I am turned on by that floor you put in that thing :masturbanana[1]: :awesomework:

Click to expand...

thanks we spent alot of time cutting and fitting all those pieces. probably would have been easier if i didnt have man exhaust but whatta ya gonna do!!:

SO here are some progress pic's for ya
hey do you guy's like my art work on the super pink panel???
View attachment 26985
as you can see we've done a lot of tube on Saturday and Monday. about 12 bar's in all, the 2 on each side of the door panel's the two rear bar's upper and lower, the three roof bar's the two rear fender bar's and one of the two rear passenger bar's
View attachment 26986
here's Skip (fly-n-lion) with his coper
View attachment 26987
two door bar's nice :awesomework:
View attachment 26988

View attachment 26989

top view
View attachment 26990

new side panel's going in
View attachment 26991

one of the two new rear passenger bar's all done with grinder:awesomework:
View attachment 26992

Jason and Chris (pickle) making engine noises
View attachment 26993

one more panel in the rear and the rear axle still has to be move back the 4 inches or so.
View attachment 26994

OH and I just picked up the new hood today allso:nana1: